Post Stock Login Register

NF A35-552 XC32 vs BS 970 (Part 1) 080A32

Strong Match — 88% match based on chemical composition and mechanical property overlap.

NF A35-552 XC32 (NF A35-552:1986) and BS 970 (Part 1) 080A32 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Carbon Steel category. NF A35-552 XC32 is typically used for used for axles, shafts, bolts, machine parts, forged components, and agricultural equipment., while BS 970 (Part 1) 080A32 is commonly used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6.. NF A35-552 XC32 is defined under Association Francaise de Normalisation (NF), originating from France, while BS 970 (Part 1) 080A32 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, NF A35-552 XC32 vs BS 970 (Part 1) 080A32 is a 88% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 88%.

Frequently Compared With NF A35-552 XC32:
BS 970 (Part 3) 070M55 BS 970 (Part 1) 040A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 040A04 BS 970 (Part 1) 040A12 BS 970 (Part 3) 045M10 BS 970 (Part 3) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 055M15 BS 970 (Part 3) 070M20
Match Breakdown
CHEMISTRY MATCH
88%
MECHANICAL MATCH
No shared data
OVERALL
88%
Specifications
Property NF A35-552 XC32 BS 970 (Part 1) 080A32
Standard NF A35-552:1986 BS 970 (Part 1):1983
Category Carbon Steel Carbon Steel
C (%) 0.29-0.35 0.30-0.35
Si (%) 0.10-0.35 Not specified
Mn (%) 0.50-0.80 0.70-0.90
P (%) 0.045 max <=0.050
S (%) 0.045 max <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-552 XC32 BS 970 (Part 1) 080A32
Tensile Strength 550-700 MPa Not specified
Yield Strength 320-420 MPa Not specified
Elongation 18-24% Not specified
Hardness 160-210 HB Not specified
Typical Applications
NF A35-552 XC32
Used for axles, shafts, bolts, machine parts, forged components, and agricultural equipment.
BS 970 (Part 1) 080A32
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can NF A35-552 XC32 Be Substituted With BS 970 (Part 1) 080A32?
NF A35-552 XC32 and BS 970 (Part 1) 080A32 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 080A32 is often considered as a substitute for NF A35-552 XC32 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
NF A35-552 XC32
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 4700–5500 mm (185.04–216.54 in)
BS 970 (Part 1) 080A32
No active listings currently.
On M-EX Right Now
NF A35-552 XC32
2 active listings and RFQs →
BS 970 (Part 1) 080A32
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-552 XC32 and BS 970 (Part 1) 080A32?
NF A35-552 XC32 specifies Si which is not specified for BS 970 (Part 1) 080A32.
Can NF A35-552 XC32 be substituted with BS 970 (Part 1) 080A32?
NF A35-552 XC32 and BS 970 (Part 1) 080A32 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 080A32 is often considered as a substitute for NF A35-552 XC32 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.