Post Stock Login Register

NF A35-552 XC48 vs BS 970 (Part 1) 060A47

Strong Match — 89.4% match based on chemical composition and mechanical property overlap.

NF A35-552 XC48 (NF A35-552:1986) and BS 970 (Part 1) 060A47 (BS 970 (Part 1):1983) are both steel grades. Both fall under the Carbon Steel category. NF A35-552 XC48 is typically used for used for gears, axles, rollers, machine spindles, hand tools, and wear-resistant parts., while BS 970 (Part 1) 060A47 is commonly used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6.. NF A35-552 XC48 is defined under Association Francaise de Normalisation (NF), originating from France, while BS 970 (Part 1) 060A47 is defined under British Standards (BS), originating from United Kingdom.

As per chemical composition, NF A35-552 XC48 vs BS 970 (Part 1) 060A47 is a 89.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.4%.

Frequently Compared With NF A35-552 XC48:
BS 970 (Part 1) 040A10 BS 970 (Part 3) 070M55 BS 970 (Part 1) 080A20 BS 970 (Part 1) 040A12 BS 970 (Part 1) 055M15 BS 970 (Part 1) 040A04 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045A10 BS 970 (Part 1) 045M10 BS 970 (Part 1) 045M10 BS 970 (Part 3) 045A10 BS 970 (Part 3) 045M10
Match Breakdown
CHEMISTRY MATCH
89.4%
MECHANICAL MATCH
No shared data
OVERALL
89.4%
Specifications
Property NF A35-552 XC48 BS 970 (Part 1) 060A47
Standard NF A35-552:1986 BS 970 (Part 1):1983
Category Carbon Steel Carbon Steel
C (%) 0.45-0.52 0.45-0.50
Si (%) 0.10-0.35 Not specified
Mn (%) 0.50-0.80 0.50-0.70
P (%) 0.045 max <=0.050
S (%) 0.045 max <=0.050
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property NF A35-552 XC48 BS 970 (Part 1) 060A47
Tensile Strength 700-850 MPa Not specified
Yield Strength 400-550 MPa Not specified
Elongation 14-20% Not specified
Hardness 190-255 HB Not specified
Typical Applications
NF A35-552 XC48
Used for gears, axles, rollers, machine spindles, hand tools, and wear-resistant parts.
BS 970 (Part 1) 060A47
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
Can NF A35-552 XC48 Be Substituted With BS 970 (Part 1) 060A47?
NF A35-552 XC48 and BS 970 (Part 1) 060A47 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A47 is often considered as a substitute for NF A35-552 XC48 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
NF A35-552 XC48
Round Bar → (2 listings)
Diameter: 40–40 mm (1.57–1.57 in)
Length: 6300–7000 mm (248.03–275.59 in)
BS 970 (Part 1) 060A47
No active listings currently.
On M-EX Right Now
NF A35-552 XC48
2 active listings and RFQs →
BS 970 (Part 1) 060A47
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between NF A35-552 XC48 and BS 970 (Part 1) 060A47?
NF A35-552 XC48 specifies Si which is not specified for BS 970 (Part 1) 060A47.
Can NF A35-552 XC48 be substituted with BS 970 (Part 1) 060A47?
NF A35-552 XC48 and BS 970 (Part 1) 060A47 overlap closely enough on chemistry and mechanical properties that BS 970 (Part 1) 060A47 is often considered as a substitute for NF A35-552 XC48 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.