Strong Match — 91.3% match
based on chemical composition and mechanical property overlap.
SAE J404 52100 (SAE J404:2009) and GOST 801 ShKh15 (GOST 801-1978) are both steel grades.
Both fall under the Alloy Steel category.
SAE J404 52100 is typically used for ball bearings, roller bearings, races, bushings, precision tooling, dies, gauges, while GOST 801 ShKh15 is commonly used for used for ball bearings, roller bearings, races, bearing rings, and precision rollers..
SAE J404 52100 is defined under SAE International (United States).
As per chemical composition, SAE J404 52100 vs GOST 801 ShKh15 is a 91.3% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.3%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Used for ball bearings, roller bearings, races, bearing rings, and precision rollers.
Key Differences
SAE J404 52100 specifies P, S which are not specified for GOST 801 ShKh15.
Can SAE J404 52100 Be Substituted With GOST 801 ShKh15?
SAE J404 52100 and GOST 801 ShKh15 overlap closely enough on chemistry and mechanical properties that GOST 801 ShKh15 is often considered as a substitute for SAE J404 52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between SAE J404 52100 and GOST 801 ShKh15?
SAE J404 52100 specifies P, S which are not specified for GOST 801 ShKh15.
Can SAE J404 52100 be substituted with GOST 801 ShKh15?
SAE J404 52100 and GOST 801 ShKh15 overlap closely enough on chemistry and mechanical properties that GOST 801 ShKh15 is often considered as a substitute for SAE J404 52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.