Post Stock Login Register

SAE J403:2001 1006 Steel: Specifications & Listings

SAE J403:2001 1006: Nonresulfurized carbon steel SAE 1006 (UNS G10060) to SAE J403 NOV2001, a chemistry-only grade for semifinished products for forging, hot rolled and cold finished bars, wire rods, plates, strip, sheets, welded tubing and seamless tubing. Carbon up to 0.08% and manganese 0.25-0.40%.

Category: Carbon Steel
Grade Details
GradeSAE J403:2001 1006
Standard SAE J403:2001
ApplicationsChemistry-only grade; product scope as listed in the composition notes
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
SAE J403 1006 SAE J403:2009 USA No activity yet
BS 970 (Part 1) 040A04 BS 970 (Part 1):1991 UK No activity yet
IS 1570 (Part 2/Sec 1) 4C2 IS 1570 (Part 2/Sec 1):1979 India No activity yet
IS 1570 (Part 2/Sec 1) 5C4 IS 1570 (Part 2/Sec 1):1979 India No activity yet
BS 970 EN2A/1 BS 970:1955 UK No activity yet
IS 1570 (Part 2/Sec 1) 7C4 IS 1570 (Part 2/Sec 1):1979 India No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
SAE J403 1006 SAE J403:2009 Strong Match
BS 970 (Part 1) 040A04 BS 970 (Part 1):1991 Strong Match
IS 1570 (Part 2/Sec 1) 4C2 IS 1570 (Part 2/Sec 1):1979 Strong Match
IS 11169 (Part 1) 4C2 IS 11169 (Part 1):1984 Strong Match
SAE J403 1008 SAE J403:2001 Strong Match
SAE J403 1008 SAE J403:2009 Strong Match
SAE J403 1005 SAE J403:2001 Strong Match
SAE J403 1004 SAE J403:2009 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S
<=0.08 0.25-0.40 <=0.030 <=0.050

More data from SAE J403:2001

From the standard
Other composition limits from the table and its notes
UNS number
G10060
Product scope
semifinished products for forging, hot rolled and cold finished bars, wire rods, plates, strip, sheets, welded tubing and seamless tubing
For structural shapes, plates, strip, sheets and welded tubing the manganese limit is 0.45% maximum with no minimum. Silicon, when required, is commonly specified as 0.10% max or a range such as 0.15 to 0.35%. Lead (0.15 to 0.35%, letter L) and boron (0.0005 to 0.003%, letter B) versions of the standard grades are identified by a letter between the second and third digits.
Source: SAE J403:2001, Table 1, nonresulfurized carbon steels and its notes

Active SAE J403:2001 1006 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active SAE J403:2001 1006 listings at this time.

Register for Alerts

Buyer RFQs for SAE J403:2001 1006

+ Post an RFQ for this grade

No open buyer requirements for SAE J403:2001 1006 at this time.

Register for Alerts