Post Stock Login Register

SAE J403 11V41 vs SAE J403 1118

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

SAE J403 11V41 (SAE J403:2009) and SAE J403 1118 (SAE J403:2014) are both steel grades. Both fall under the Free Machining Steel category. SAE J403 11V41 is typically used for chemistry-only grade; product scope as listed in the composition notes, while SAE J403 1118 is commonly used for chemistry-only grade; product scope as listed in the composition notes. SAE J403 11V41 is defined under SAE International, originating from United States, while SAE J403 1118 is defined under SAE International, originating from United States.

As per chemical composition, SAE J403 11V41 vs SAE J403 1118 is a 87% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With SAE J403 11V41:
SAE J403 1141 SAE J403 1141 SAE J403 1141 SAE J403 1137 SAE J403 1140 IS 4432 10C8S10 SAE J403 1117 IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1117 SAE J403 1118 SAE J403 1140
Match Breakdown
CHEMISTRY MATCH
87%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property SAE J403 11V41 SAE J403 1118
Standard SAE J403:2009 SAE J403:2014
Category Free Machining Steel Free Machining Steel
C (%) 0.37-0.45 0.14-0.20
Mn (%) 1.35-1.65 1.30-1.60
P (%) <=0.030 <=0.030
S (%) 0.08-0.13 0.08-0.13
V (%) 0.04-0.08 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J403 11V41
Chemistry-only grade; product scope as listed in the composition notes
SAE J403 1118
Chemistry-only grade; product scope as listed in the composition notes
Key Differences
Can SAE J403 11V41 Be Substituted With SAE J403 1118?
SAE J403 11V41 and SAE J403 1118 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
SAE J403 11V41
0 active listings and RFQs →
SAE J403 1118
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J403 11V41 and SAE J403 1118?
SAE J403 11V41 specifies V which is not specified for SAE J403 1118.
Can SAE J403 11V41 be substituted with SAE J403 1118?
SAE J403 11V41 and SAE J403 1118 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.