Strong Match — 92.7% match
based on chemical composition and mechanical property overlap.
SAE J403 1213 (SAE J403:2009) and SAE J403 1212 (SAE J403:2009) are both steel grades.
Both fall under the Free Machining Steel category.
SAE J403 1213 is typically used for chemistry-only grade; product scope as listed in the composition notes, while SAE J403 1212 is commonly used for chemistry-only grade; product scope as listed in the composition notes.
SAE J403 1213 is defined under SAE International, originating from United States, while SAE J403 1212 is defined under SAE International, originating from United States.
As per chemical composition, SAE J403 1213 vs SAE J403 1212 is a 92.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 92.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J403 1213
Chemistry-only grade; product scope as listed in the composition notes
SAE J403 1212
Chemistry-only grade; product scope as listed in the composition notes
Can SAE J403 1213 Be Substituted With SAE J403 1212?
SAE J403 1213 and SAE J403 1212 overlap closely enough on chemistry and mechanical properties that SAE J403 1212 is often considered as a substitute for SAE J403 1213 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between SAE J403 1213 and SAE J403 1212?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can SAE J403 1213 be substituted with SAE J403 1212?
SAE J403 1213 and SAE J403 1212 overlap closely enough on chemistry and mechanical properties that SAE J403 1212 is often considered as a substitute for SAE J403 1213 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.