Strong Match — 91.4% match
based on chemical composition and mechanical property overlap.
SAE J404 1345 (SAE J404:2000) and SAE J404 1335 (SAE J404:2009) are both steel grades.
Both fall under the Alloy Steel category.
SAE J404 1345 is typically used for chemistry-only alloy steel grade; see the composition notes for product scope, while SAE J404 1335 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope.
SAE J404 1345 is defined under SAE International, originating from United States, while SAE J404 1335 is defined under SAE International, originating from United States.
As per chemical composition, SAE J404 1345 vs SAE J404 1335 is a 91.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J404 1345
Chemistry-only alloy steel grade; see the composition notes for product scope
SAE J404 1335
Chemistry-only alloy steel grade; see the composition notes for product scope
Can SAE J404 1345 Be Substituted With SAE J404 1335?
SAE J404 1345 and SAE J404 1335 overlap closely enough on chemistry and mechanical properties that SAE J404 1335 is often considered as a substitute for SAE J404 1345 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between SAE J404 1345 and SAE J404 1335?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can SAE J404 1345 be substituted with SAE J404 1335?
SAE J404 1345 and SAE J404 1335 overlap closely enough on chemistry and mechanical properties that SAE J404 1335 is often considered as a substitute for SAE J404 1345 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.