Post Stock Login Register

SAE J404 4135 vs JIS G4105 SCM435

Strong Match — 89.2% match based on chemical composition and mechanical property overlap.

SAE J404 4135 (SAE J404:2000) and JIS G4105 SCM435 (JIS G4105:1979) are both steel grades. Both fall under the Alloy Steel category. SAE J404 4135 is typically used for chemistry-only alloy steel grade; see the composition notes for product scope, while JIS G4105 SCM435 is commonly used for gears, shafts, high tensile bolts. SAE J404 4135 is defined under SAE International, originating from United States, while JIS G4105 SCM435 is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, SAE J404 4135 vs JIS G4105 SCM435 is a 89.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 89.2%.

Frequently Compared With SAE J404 4135:
IS 11169 (Part 1) 12Cr4Mo2 IS 4367 10Cr9Mo10 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr4 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
89.2%
MECHANICAL MATCH
No shared data
OVERALL
89.2%
Specifications
Property SAE J404 4135 JIS G4105 SCM435
Standard SAE J404:2000 JIS G4105:1979
Category Alloy Steel Alloy Steel
C (%) 0.33-0.38 0.33–0.38
Cr (%) 0.80-1.10 0.90–1.20
Mn (%) 0.70-0.90 0.60–0.90
Mo (%) 0.15-0.25 0.15–0.30
P (%) <=0.030 Not specified
S (%) <=0.040 Not specified
Si (%) 0.15-0.35 0.15–0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SAE J404 4135 JIS G4105 SCM435
Tensile Strength Not specified ≥830 MPa
Yield Strength Not specified ≥685 MPa
Elongation Not specified ≥15%
Hardness Not specified 248–302 HB
Typical Applications
SAE J404 4135
Chemistry-only alloy steel grade; see the composition notes for product scope
JIS G4105 SCM435
Gears, shafts, high tensile bolts
Key Differences
Can SAE J404 4135 Be Substituted With JIS G4105 SCM435?
SAE J404 4135 and JIS G4105 SCM435 overlap closely enough on chemistry and mechanical properties that JIS G4105 SCM435 is often considered as a substitute for SAE J404 4135 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
SAE J404 4135
No active listings currently.
JIS G4105 SCM435
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 4600–5300 mm (181.1–208.66 in)
On M-EX Right Now
SAE J404 4135
0 active listings and RFQs →
JIS G4105 SCM435
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J404 4135 and JIS G4105 SCM435?
SAE J404 4135 specifies P, S which are not specified for JIS G4105 SCM435.
Can SAE J404 4135 be substituted with JIS G4105 SCM435?
SAE J404 4135 and JIS G4105 SCM435 overlap closely enough on chemistry and mechanical properties that JIS G4105 SCM435 is often considered as a substitute for SAE J404 4135 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.