Post Stock Login Register

SAE J404 8622 vs AISI 8620

Strong Match — 94.7% match based on chemical composition and mechanical property overlap.

SAE J404 8622 (SAE J404:2000) and AISI 8620 are both steel grades. Both fall under the Alloy Steel category. SAE J404 8622 is typically used for chemistry-only alloy steel grade; see the composition notes for product scope, while AISI 8620 is commonly used for used for gears, shafts, sprockets, pinions, bushings, and transmission components.. SAE J404 8622 is defined under SAE International, originating from United States, while AISI 8620 is defined under AISI, originating from United States.

As per chemical composition, SAE J404 8622 vs AISI 8620 is a 94.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 94.7%.

Frequently Compared With SAE J404 8622:
IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Cr36Mo10H IS 1570 (Part 7) 10Mo6H IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 4) 10Mo6 NF A35-565 100C6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 IS 4367 10Cr9Mo10
Match Breakdown
CHEMISTRY MATCH
94.7%
MECHANICAL MATCH
No shared data
OVERALL
94.7%
Specifications
Property SAE J404 8622 AISI 8620
Standard SAE J404:2000 AISI
Category Alloy Steel Alloy Steel
C (%) 0.20-0.25 0.18-0.23
Cr (%) 0.40-0.60 0.40-0.60
Mn (%) 0.70-0.90 0.70-0.90
Mo (%) 0.15-0.25 0.15-0.25
Ni (%) 0.40-0.70 0.40-0.70
P (%) <=0.030 0.035 max
S (%) <=0.040 0.040 max
Si (%) 0.15-0.35 0.15-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SAE J404 8622 AISI 8620
Tensile Strength Not specified 750-980 MPa
Yield Strength Not specified 550-780 MPa
Elongation Not specified 12-18%
Hardness Not specified 200-280 HB
Typical Applications
SAE J404 8622
Chemistry-only alloy steel grade; see the composition notes for product scope
AISI 8620
Used for gears, shafts, sprockets, pinions, bushings, and transmission components.
Can SAE J404 8622 Be Substituted With AISI 8620?
SAE J404 8622 and AISI 8620 overlap closely enough on chemistry and mechanical properties that AISI 8620 is often considered as a substitute for SAE J404 8622 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
SAE J404 8622
No active listings currently.
AISI 8620
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 6600–6900 mm (259.84–271.65 in)
On M-EX Right Now
SAE J404 8622
0 active listings and RFQs →
AISI 8620
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J404 8622 and AISI 8620?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can SAE J404 8622 be substituted with AISI 8620?
SAE J404 8622 and AISI 8620 overlap closely enough on chemistry and mechanical properties that AISI 8620 is often considered as a substitute for SAE J404 8622 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.