Post Stock Login Register

SAE J404 9254 vs GOST 14959 60S2A

Close Alternative — 76.2% match based on chemical composition and mechanical property overlap.

SAE J404 9254 (SAE J404:2000) and GOST 14959 60S2A (GOST 14959-2016) are both steel grades. Both fall under the Alloy Steel category. SAE J404 9254 is typically used for chemistry-only alloy steel grade; see the composition notes for product scope, while GOST 14959 60S2A is commonly used for used for coil springs, suspension springs, washers, torsion bars, and railway springs.. SAE J404 9254 is defined under SAE International (United States).

As per chemical composition, SAE J404 9254 vs GOST 14959 60S2A is a 76.2% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a close alternative overall at 76.2%.

Frequently Compared With SAE J404 9254:
IS 1570 (Part 4) 103Cr4 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H IS 4367 10Cr9Mo10 IS 4367 07Cr4Mo6 NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 11169 (Part 1) 10Ni5Cr4 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Mo6
Match Breakdown
CHEMISTRY MATCH
76.2%
MECHANICAL MATCH
No shared data
OVERALL
76.2%
Specifications
Property SAE J404 9254 GOST 14959 60S2A
Standard SAE J404:2000 GOST 14959-2016
Category Alloy Steel Alloy Steel
C (%) 0.51-0.59 0.56-0.64
Cr (%) 0.60-0.80 0.35 max
Mn (%) 0.60-0.80 0.6-0.9
P (%) <=0.030 Not specified
S (%) <=0.040 Not specified
Si (%) 1.20-1.60 1.5-2.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SAE J404 9254 GOST 14959 60S2A
Tensile Strength Not specified 1270-1570 MPa
Yield Strength Not specified 1080 MPa min
Elongation Not specified 6% min
Hardness Not specified 44-52 HRC
Typical Applications
SAE J404 9254
Chemistry-only alloy steel grade; see the composition notes for product scope
GOST 14959 60S2A
Used for coil springs, suspension springs, washers, torsion bars, and railway springs.
Key Differences
Can SAE J404 9254 Be Substituted With GOST 14959 60S2A?
SAE J404 9254 and GOST 14959 60S2A are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
Forms & Sizes Available on M-EX
SAE J404 9254
No active listings currently.
GOST 14959 60S2A
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5400–5900 mm (212.6–232.28 in)
On M-EX Right Now
SAE J404 9254
0 active listings and RFQs →
GOST 14959 60S2A
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J404 9254 and GOST 14959 60S2A?
SAE J404 9254 specifies P, S which are not specified for GOST 14959 60S2A.
Can SAE J404 9254 be substituted with GOST 14959 60S2A?
SAE J404 9254 and GOST 14959 60S2A are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.