Strong Match — 92.4% match
based on chemical composition and mechanical property overlap.
SAE J404 4615 (SAE J404:2009) and SAE J404 4617 (SAE J404:2009) are both steel grades.
Both fall under the Alloy Steel category.
SAE J404 4615 is typically used for chemistry-only alloy steel grade; see the composition notes for product scope, while SAE J404 4617 is commonly used for chemistry-only alloy steel grade; see the composition notes for product scope.
SAE J404 4615 is defined under SAE International, originating from United States, while SAE J404 4617 is defined under SAE International, originating from United States.
As per chemical composition, SAE J404 4615 vs SAE J404 4617 is a 92.4% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 92.4%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J404 4615
Chemistry-only alloy steel grade; see the composition notes for product scope
SAE J404 4617
Chemistry-only alloy steel grade; see the composition notes for product scope
Can SAE J404 4615 Be Substituted With SAE J404 4617?
SAE J404 4615 and SAE J404 4617 overlap closely enough on chemistry and mechanical properties that SAE J404 4617 is often considered as a substitute for SAE J404 4615 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between SAE J404 4615 and SAE J404 4617?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can SAE J404 4615 be substituted with SAE J404 4617?
SAE J404 4615 and SAE J404 4617 overlap closely enough on chemistry and mechanical properties that SAE J404 4617 is often considered as a substitute for SAE J404 4615 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.