Post Stock Login Register

SAE J404 9260 vs IS 5517 46V1S3

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

SAE J404 9260 (SAE J404:2009) and IS 5517 46V1S3 (IS 5517:1993) are both steel grades. Both fall under the Alloy Steel category. SAE J404 9260 is defined under SAE International, originating from United States, while IS 5517 46V1S3 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, SAE J404 9260 vs IS 5517 46V1S3 is a 74.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With SAE J404 9260:
IS 4367 07Cr4Mo6 UNI 11234 100Cr6 IS 1570 (Part 4) 103Cr4 IS 1570 (Part 4) 103Cr6 IS 1570 (Part 7) 10Cr36Mo10H NF A35-565 100C6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 105Cr5 IS 1570 (Part 4) 10Mo6 EN 10028-2 10CrMo9-10 IS 1570 (Part 4) 07Cr4Mo6
Match Breakdown
CHEMISTRY MATCH
74.6%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property SAE J404 9260 IS 5517 46V1S3
Standard SAE J404:2009 IS 5517:1993
Category Alloy Steel Alloy Steel
C (%) 0.56-0.64 0.42-0.50
Mn (%) 0.75-1.00 0.60-1.00
P (%) <=0.030 <=0.035
S (%) <=0.040 0.045-0.065
Si (%) 1.80-2.20 <=0.60
V (%) Not specified 0.08-0.13
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property SAE J404 9260 IS 5517 46V1S3
Hardness (annealed) Not specified <=220 HB
Typical Applications
SAE J404 9260
Chemistry-only alloy steel grade; see the composition notes for product scope
IS 5517 46V1S3
Not documented
Key Differences
Can SAE J404 9260 Be Substituted With IS 5517 46V1S3?
SAE J404 9260 and IS 5517 46V1S3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
SAE J404 9260
0 active listings and RFQs →
IS 5517 46V1S3
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J404 9260 and IS 5517 46V1S3?
IS 5517 46V1S3 specifies V which is not specified for SAE J404 9260.
Can SAE J404 9260 be substituted with IS 5517 46V1S3?
SAE J404 9260 and IS 5517 46V1S3 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.