Post Stock Login Register

SAE J404 E52100 vs IS 1570 (Part 4) 103Cr4

Strong Match — 85.7% match based on chemical composition and mechanical property overlap.

SAE J404 E52100 (SAE J404:2009) and IS 1570 (Part 4) 103Cr4 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. SAE J404 E52100 is defined under SAE International, originating from United States, while IS 1570 (Part 4) 103Cr4 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, SAE J404 E52100 vs IS 1570 (Part 4) 103Cr4 is a 85.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.7%.

Frequently Compared With SAE J404 E52100:
IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 105Cr5 NF A35-565 100C6 UNI 11234 100Cr6 IS 1570 (Part 4) 10Cr20Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 10Mo6 IS 11169 (Part 1) 10Ni5Cr4 IS 4367 07Cr4Mo6 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 7) 10Mo6H IS 1570 (Part 7) 10Cr36Mo10H
Match Breakdown
CHEMISTRY MATCH
85.7%
MECHANICAL MATCH
No shared data
OVERALL
85.7%
Specifications
Property SAE J404 E52100 IS 1570 (Part 4) 103Cr4
Standard SAE J404:2009 IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.98-1.10 0.95-1.10
Cr (%) 1.30-1.60 0.90-1.20
Mn (%) 0.25-0.45 0.25-0.45
P (%) <=0.025 Not specified
S (%) <=0.025 Not specified
Si (%) 0.15-0.35 0.10-0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
SAE J404 E52100
Chemistry-only alloy steel grade; see the composition notes for product scope
IS 1570 (Part 4) 103Cr4
Not documented
Key Differences
Can SAE J404 E52100 Be Substituted With IS 1570 (Part 4) 103Cr4?
SAE J404 E52100 and IS 1570 (Part 4) 103Cr4 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 103Cr4 is often considered as a substitute for SAE J404 E52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
SAE J404 E52100
0 active listings and RFQs →
IS 1570 (Part 4) 103Cr4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between SAE J404 E52100 and IS 1570 (Part 4) 103Cr4?
SAE J404 E52100 specifies P, S which are not specified for IS 1570 (Part 4) 103Cr4.
Can SAE J404 E52100 be substituted with IS 1570 (Part 4) 103Cr4?
SAE J404 E52100 and IS 1570 (Part 4) 103Cr4 overlap closely enough on chemistry and mechanical properties that IS 1570 (Part 4) 103Cr4 is often considered as a substitute for SAE J404 E52100 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.