Close Alternative — 82.1% match
based on chemical composition and mechanical property overlap.
SS 14 21 72 2172 and BS 970 (Part 1) 060A32 (BS 970 (Part 1):1983) are both steel grades.
Both fall under the Carbon Steel category.
SS 14 21 72 2172 is typically used for shafts,axles,gears,studs,bolts,general engineering components,machine parts, while BS 970 (Part 1) 060A32 is commonly used for through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of table 6..
SS 14 21 72 2172 is defined under Swedish Standards (SS), originating from Sweden, while BS 970 (Part 1) 060A32 is defined under British Standards (BS), originating from United Kingdom.
As per chemical composition, SS 14 21 72 2172 vs BS 970 (Part 1) 060A32 is a 82.1% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a close alternative overall at 82.1%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
SS 14 21 72 2172
BS 970 (Part 1) 060A32
Tensile Strength
620-800 MPa
Not specified
Yield Strength
340-490 MPa
Not specified
Elongation
14-20 %
Not specified
Hardness
179-235 HB
Not specified
Typical Applications
SS 14 21 72 2172
shafts,axles,gears,studs,bolts,general engineering components,machine parts
BS 970 (Part 1) 060A32
Through hardening steel for mechanical and allied engineering purposes; supplied in the hardened and tempered conditions of Table 6.
Key Differences
SS 14 21 72 2172 specifies Si which is not specified for BS 970 (Part 1) 060A32.
Can SS 14 21 72 2172 Be Substituted With BS 970 (Part 1) 060A32?
SS 14 21 72 2172 and BS 970 (Part 1) 060A32 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.
What is the difference between SS 14 21 72 2172 and BS 970 (Part 1) 060A32?
SS 14 21 72 2172 specifies Si which is not specified for BS 970 (Part 1) 060A32.
Can SS 14 21 72 2172 be substituted with BS 970 (Part 1) 060A32?
SS 14 21 72 2172 and BS 970 (Part 1) 060A32 are a close alternative rather than a direct substitute. Some properties overlap well, but check the specific chemistry and mechanical rows above against your application's requirements before treating them as interchangeable.