Post Stock Login Register

UNS C12200 vs UNS C10200

Strong Match — 90.7% match based on chemical composition and mechanical property overlap.

UNS C12200 and UNS C10200 are both copper grades. Both fall under the Copper Alloys category. UNS C12200 is defined under Unified Numbering System (UNS), originating from United States, while UNS C10200 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C12200 vs UNS C10200 is a 86.1% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 90.7%.

Frequently Compared With UNS C12200:
UNS C11000 UNS C12000 UNS C10100 UNS C14500 UNS C17200 UNS C19400
Match Breakdown
CHEMISTRY MATCH
86.1%
MECHANICAL MATCH
100%
OVERALL
90.7%
Specifications
Property UNS C12200 UNS C10200
Standard UNS UNS
Category Copper Alloys Copper Alloys
Cu (%) 99.90 min 99.95 min
P (%) 0.015-0.040 Not specified
O (%) Not specified 0-0.0010
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C12200 UNS C10200
Yield Strength ~69 MPa (annealed O60) ~69 MPa (annealed O60)
Tensile Strength ~220 MPa (annealed O60) ~220 MPa (annealed O60)
Elongation ~45% (annealed O60) ~45% (annealed O60)
Note Phosphorized copper (high P), values for soft annealed condition Oxygen-free copper, values for soft annealed condition
Key Differences
Can UNS C12200 Be Substituted With UNS C10200?
UNS C12200 and UNS C10200 overlap closely enough on chemistry and mechanical properties that UNS C10200 is often considered as a substitute for UNS C12200 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
UNS C12200
Sheet → (6 listings)
Thickness: 0.8–1.5 mm (0.03–0.06 in)
Width: 1000–1000 mm (39.37–39.37 in)
Length: 2000–2000 mm (78.74–78.74 in)
UNS C10200
No active listings currently.
On M-EX Right Now
UNS C12200
6 active listings and RFQs →
UNS C10200
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C12200 and UNS C10200?
UNS C12200 specifies P which is not specified for UNS C10200. UNS C10200 specifies O which is not specified for UNS C12200.
Can UNS C12200 be substituted with UNS C10200?
UNS C12200 and UNS C10200 overlap closely enough on chemistry and mechanical properties that UNS C10200 is often considered as a substitute for UNS C12200 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.