Post Stock Login Register

UNS C12200 vs UNS C19400

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

UNS C12200 and UNS C19400 are both copper grades. Both fall under the Copper Alloys category. UNS C12200 is defined under Unified Numbering System (UNS), originating from United States, while UNS C19400 is defined under Unified Numbering System (UNS), originating from United States.

As per chemical composition, UNS C12200 vs UNS C19400 is a 66.7% match. As per mechanical properties, the match is 0%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With UNS C12200:
UNS C11000 UNS C12000 UNS C10200 UNS C10100 UNS C14500 UNS C17200
Match Breakdown
CHEMISTRY MATCH
66.7%
MECHANICAL MATCH
0%
OVERALL
35%
Specifications
Property UNS C12200 UNS C19400
Standard UNS UNS
Category Copper Alloys Copper Alloys
Cu (%) 99.90 min 97.00 min
P (%) 0.015-0.040 0.015-0.15
Pb (%) Not specified 0-0.03
Zn (%) Not specified 0.05-0.20
Fe (%) Not specified 2.10-2.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property UNS C12200 UNS C19400
Yield Strength ~69 MPa (annealed O60) ~365 MPa min (H04)
Tensile Strength ~220 MPa (annealed O60) ~415-485 MPa (H04)
Elongation ~45% (annealed O60) ~3% min (H04)
Note Phosphorized copper (high P), values for soft annealed condition Iron-phosphorus copper (CuFe2P), values for H04 temper per mill datasheet
Key Differences
Can UNS C12200 Be Substituted With UNS C19400?
UNS C12200 and UNS C19400 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
UNS C12200
Sheet → (6 listings)
Thickness: 0.8–1.5 mm (0.03–0.06 in)
Width: 1000–1000 mm (39.37–39.37 in)
Length: 2000–2000 mm (78.74–78.74 in)
UNS C19400
No active listings currently.
On M-EX Right Now
UNS C12200
6 active listings and RFQs →
UNS C19400
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between UNS C12200 and UNS C19400?
UNS C19400 specifies Pb, Zn, Fe which are not specified for UNS C12200.
Can UNS C12200 be substituted with UNS C19400?
UNS C12200 and UNS C19400 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.