EN 10083-2 C60 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10083-2 C60, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
0 |
33 |
Shortage |
56,055
to
60,688
median 57,232
|
EN 10083-2 C60's demand ranks in the top 11% of all 484 tracked grades platform-wide.
The Round Bar form most recently moved into Shortage, 125 days ago.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10083-2 C60 is a Carbon Steel grade: A higher carbon steel for quenching and tempering to EN 10083-2:2006 (steel number 1.0601, non alloy quality steel). Supplied as semi-finished products, bars, rod, wide flats, hot rolled strip, sheet and plate, and forgings. Quenched and tempered tensile strength 850 to 1 000 MPa for ruling sections up to 16 mm.
Typical applications: Used in springs, knives, wear plates, high-strength wires, and hand tools..
Equivalent / Similar Grades (4)
| Grade |
Standard |
Region |
|
SWRH62B
|
JIS G3506 |
Japan |
|
ISO C60
|
ISO 683-1:1987 |
International |
|
DIN C 60 (1.0601)
|
DIN |
Germany |
|
UNI C60
|
UNI |
Italy |
Chemical Composition (%)
| C |
Cr |
Cr+Mo+Ni |
Mn |
Mo |
Ni |
P |
S |
Si |
| 0.57-0.65 |
<=0.40 |
<=0.63 |
0.60-0.90 |
<=0.10 |
<=0.40 |
<=0.045 |
<=0.045 |
<=0.40 |
Mechanical Properties
| Condition |
Quenched and tempered (+QT), ruling section d <= 16 mm |
| Elongation |
11% min |
| Hardness |
Soft annealed (+A): 241 HBW max |
| Tensile Strength |
850 to 1 000 MPa |
| Yield Strength |
580 MPa min |