EN 10025-5 S355J0WP Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10025-5 S355J0WP, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 3:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Plate |
1 |
1 |
Low Activity |
Insufficient data
|
EN 10025-5 S355J0WP's demand ranks in the top 25% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10025-5 S355J0WP is a Structural Steel (Corten / Weathering) grade: S355J0WP: structural steel with improved atmospheric corrosion resistance (weathering steel). Specified in EN 10025-5:2019.
Typical applications: High-phosphorus weathering steel for enhanced patina formation; containers, smokestacks, freight wagons, silos, pylons, bridges, architectural exposed structures.
Equivalent / Similar Grades (1)
| Grade |
Standard |
Region |
|
S355J2WP
|
EN 10025-5 |
Europe |
Chemical Composition (%)
| C |
Si |
Mn |
P |
S |
N |
Cr |
Cu |
| <=0.12 |
<=0.75 |
<=1.0 |
0.06-0.15 |
<=0.035 |
<=0.012 |
0.30-1.25 |
0.25-0.55 |
Mechanical Properties
| Tensile Strength |
470-630 MPa |
| Yield Strength |
>=355 MPa |
| Elongation |
>=22% |
| Condition |
Nominal thickness up to 16 mm for yield, 3 to 100 mm for tensile, 3 to 40 mm for elongation (Lo = 5.65 sqrt(S0), longitudinal); transverse values are lower, see blocks |