EN 10083-1 36CrNiMo4 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10083-1 36CrNiMo4, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 12:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
0 |
2 |
Low Activity |
Insufficient data
|
EN 10083-1 36CrNiMo4's demand ranks in the top 13% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10083-1 36CrNiMo4 is an Alloy Steel grade: A chromium nickel molybdenum alloy steel for quenching and tempering to EN 10083-1:1991 (printed 36 CrNiMo 4). Supplied as semi-finished products, bars, rod, wide flats, hot rolled strip, sheet and plate, and forgings. Quenched and tempered tensile strength 1100 to 1300 MPa for ruling sections up to 16 mm.
Typical applications: Shafts, gears, high strength fasteners.
Equivalent / Similar Grades (6)
| Grade |
Standard |
Region |
|
EN24
|
BS 970 |
UK |
|
AISI 4340
|
SAE |
USA |
|
SNCM439
|
JIS |
Japan |
|
ISO 36 CrNiMo 4
|
ISO 683-1:1987 |
International |
|
DIN 36 CrNiMo 4 (1.6511)
|
DIN |
Germany |
|
BS 817M37
|
BS |
UK |
Chemical Composition (%)
| C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
| 0.32-0.40 |
0.90-1.20 |
0.50-0.80 |
0.15-0.30 |
0.90-1.20 |
<=0.035 |
<=0.035 |
<=0.40 |
Mechanical Properties
| Condition |
Quenched and tempered, ruling section d <= 16 mm |
| Elongation |
10% min |
| Hardness |
Soft annealed: 248 HB max |
| Tensile Strength |
1100 to 1300 MPa |
| Yield Strength |
900 MPa min |