EN 10083-3 51CrV4 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10083-3 51CrV4, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
49 |
1 |
Deep Supply |
75,721
to
86,153
median 81,577
|
EN 10083-3 51CrV4's demand ranks in the top 38% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10083-3 51CrV4 is a Spring Steel grade: A chromium vanadium alloy steel for quenching and tempering to EN 10083-3:2006 (steel number 1.8159). Supplied as semi-finished products, bars, rod, wide flats, hot rolled strip, sheet and plate, and forgings. Quenched and tempered tensile strength 1100 to 1300 MPa for ruling sections up to 16 mm.
Typical applications: Valve springs, clutch springs, high duty coil springs.
Equivalent / Similar Grades (10)
| Grade |
Standard |
Region |
|
EN47
|
BS 970 |
UK |
|
AISI 6150
|
SAE |
USA |
|
SUP10
|
JIS |
Japan |
|
SAE5160
|
SAE |
USA |
|
ISO 51CrV4
|
ISO 683-1:1987 |
International |
|
DIN 50CrV4 (1.8159)
|
DIN |
Germany |
|
BS 735A50
|
BS |
UK |
|
NF 50CV 4
|
NF |
France |
|
UNI 50CrV4
|
UNI |
Italy |
|
UNE 51CrV4 (F1430)
|
UNE |
Spain |
Chemical Composition (%)
| C |
Cr |
Mn |
P |
S |
Si |
V |
| 0.47-0.55 |
0.90-1.20 |
0.70-1.10 |
<=0.025 |
<=0.025 |
<=0.40 |
0.10-0.25 |
Mechanical Properties
| Condition |
Quenched and tempered (+QT), ruling section d <= 16 mm |
| Elongation |
9% min |
| Hardness |
Soft annealed (+A): 248 HBW max |
| Tensile Strength |
1100 to 1300 MPa |
| Yield Strength |
900 MPa min |