EN 10084 15NiCr13 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10084 15NiCr13, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Lifetime: This grade’s supply and demand by form, across everything ever listed on M-EX. Use this for the long view. For example, “Has this grade historically drawn more buyers than sellers?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
101 |
2 |
Oversupplied |
67,685
to
124,837
median 96,147
|
EN 10084 15NiCr13's demand ranks in the top 36% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10084 15NiCr13 is an Alloy Steel grade: A nickel chromium alloy special steel for case hardening to EN 10084:2008 (steel number 1.5752). Supplied as semi-finished products, bars, rod, flat products and forgings (Table 1); intended for carburizing or carbonitriding and subsequent hardening, giving a hard surface layer and a tough core (clause 3.1).
Typical applications: Heavily loaded gears, cams, camshafts.
Equivalent / Similar Grades (10)
Chemical Composition (%)
| C |
Cr |
Mn |
Ni |
P |
S |
Si |
| 0.14-0.20 |
0.60-0.90 |
0.40-0.70 |
3.00-3.50 |
<=0.025 |
<=0.035 |
<=0.40 |
Mechanical Properties
| Condition |
Soft annealed |
| Hardenability |
+H band at 1.5 mm from the quenched end: 41 to 48 HRC |
| Hardness |
Soft annealed: 229 HB max |