EN 10084 16MnCrS5 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10084 16MnCrS5, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 7:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
1 |
1 |
Low Activity |
Insufficient data
|
EN 10084 16MnCrS5's demand ranks in the top 25% of all 484 tracked grades platform-wide.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10084 16MnCrS5 is an Alloy Steel grade: A manganese chromium alloy special steel for case hardening to EN 10084:2008 (steel number 1.7139), with controlled sulphur of 0.020 to 0.040% for better machinability. Supplied as semi-finished products, bars, rod, flat products and forgings (Table 1); intended for carburizing or carbonitriding and subsequent hardening, giving a hard surface layer and a tough core (clause 3.1).
Typical applications: Gears, shafts and precision components requiring good surface finish after carburising.
Equivalent / Similar Grades (8)
| Grade |
Standard |
Region |
|
16Mn5Cr4
|
IS 4367 |
India |
|
ISO 16MnCrS5
|
ISO 683-11:1987 |
International |
|
DIN 16MnCrS5 (1.7139)
|
DIN |
Germany |
|
UNE 16MnCr5-1
|
UNE |
Spain |
|
SS 2127
|
SS |
Sweden |
|
16Mn5Cr4-S
|
IS 4432 |
India |
|
590H17
|
BS 970 (Part 1) |
UK |
|
590M17
|
BS 970 (Part 1) |
UK |
Chemical Composition (%)
| C |
Cr |
Mn |
P |
S |
Si |
| 0.14-0.19 |
0.80-1.10 |
1.00-1.30 |
<=0.025 |
0.020-0.040 |
<=0.40 |
Mechanical Properties
| Condition |
Soft annealed |
| Hardenability |
+H band at 1.5 mm from the quenched end: 39 to 47 HRC |
| Hardness |
Soft annealed: 207 HB max |