EN 10084 20NiCrMo2-2 Steel: Supply & Demand
Buyer RFQ demand against seller listing supply for EN 10084 20NiCrMo2-2, broken down by form. Signals are indicative and derived from listings and RFQs.
Last updated: 16 Oct 2026, 1:00 AM
Live Signal: This grade’s supply and demand by form, from listings and RFQs open right now. Use this to act today. For example, “Is there a buyer gap in this grade’s round bar this week?”
| Form |
Supply |
Demand |
Status |
Price Band (Rs./MT) |
| Round Bar |
4 |
1 |
Deep Supply |
69,229
to
125,392
median 122,578
|
EN 10084 20NiCrMo2-2's demand ranks in the top 25% of all 484 tracked grades platform-wide.
The Round Bar form most recently moved into Deep Supply, 38 days ago.
Disclaimer: All information on this page is indicative only and derived from posted listings and RFQs on M-EX. It does not constitute a market price quote or investment advice. M-EX and GTE make no representations as to accuracy or completeness. Actual activity depends on quantity, quality, payment terms and other commercial factors agreed between buyers and sellers.
EN 10084 20NiCrMo2-2 is an Alloy Steel grade: A nickel chromium molybdenum alloy special steel for case hardening to EN 10084:2008 (steel number 1.6523). Supplied as semi-finished products, bars, rod, flat products and forgings (Table 1); intended for carburizing or carbonitriding and subsequent hardening, giving a hard surface layer and a tough core (clause 3.1).
Typical applications: Gears, shafts and automotive transmission components.
Equivalent / Similar Grades (13)
| Grade |
Standard |
Region |
|
SAE8620
|
SAE |
USA |
|
SNCM220
|
JIS |
Japan |
|
ISO 20NiCrMo2
|
ISO 683-11:1987 |
International |
|
DIN 21NiCrMo2 (1.6523)
|
DIN |
Germany |
|
NF 20NCD2
|
NF |
France |
|
UNI 20NiCrMo2
|
UNI |
Italy |
|
UNE 20NiCrMo2
|
UNE |
Spain |
|
BS 805M20
|
BS |
UK |
|
805H20
|
BS 970 (Part 1) |
UK |
|
805M20
|
BS 970 (Part 1) |
UK |
|
805M17
|
BS 970 (Part 3) |
UK |
|
805M22
|
BS 970 (Part 1) |
UK |
|
805H22
|
BS 970 (Part 1) |
UK |
Chemical Composition (%)
| C |
Cr |
Mn |
Mo |
Ni |
P |
S |
Si |
| 0.17-0.23 |
0.35-0.70 |
0.65-0.95 |
0.15-0.25 |
0.40-0.70 |
<=0.025 |
<=0.035 |
<=0.40 |
Mechanical Properties
| Condition |
Soft annealed |
| Hardenability |
+H band at 1.5 mm from the quenched end: 41 to 49 HRC |
| Hardness |
Soft annealed: 212 HB max |