Post Stock Login Register

AISI 1213 vs JIS G4804 SUM22L

Strong Match — 96.7% match based on chemical composition and mechanical property overlap.

AISI 1213 and JIS G4804 SUM22L (JIS G 4804:2021) are both steel grades. Both fall under the Free Machining Steel category. AISI 1213 is typically used for screw machine products, bolts, studs, while JIS G4804 SUM22L is commonly used for complex precision turned parts, high speed machining. AISI 1213 is defined under AISI, originating from United States, while JIS G4804 SUM22L is defined under Japanese Industrial Standards (JIS), originating from Japan.

As per chemical composition, AISI 1213 vs JIS G4804 SUM22L is a 95.1% match. As per mechanical properties, the match is 100%. Combined, this makes them a strong match overall at 96.7%.

Frequently Compared With AISI 1213:
IS 1570 (Part 3) 10C8S10 SAE J403 1117 SAE J403 1126 SAE J403 1132 SAE J403 1132 IS 4432 10C8S10 SAE J403 1117 SAE J403 1118 SAE J403 1118 SAE J403 1126 SAE J403 1126 SAE J403 1117
Match Breakdown
CHEMISTRY MATCH
95.1%
MECHANICAL MATCH
100%
OVERALL
96.7%
Specifications
Property AISI 1213 JIS G4804 SUM22L
Standard AISI JIS G 4804:2021
Category Free Machining Steel Free Machining Steel
C (%) ≤0.13 ≤0.13
Mn (%) 0.70–1.00 0.70–1.00
S (%) 0.24–0.33 0.24–0.33
P (%) 0.07–0.12 0.07–0.12
Pb (%) Not specified 0.10–0.35
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AISI 1213 JIS G4804 SUM22L
Tensile Strength 380–490 MPa 380–490 MPa
Elongation ≥10% Not specified
Hardness ≤149 HB ≤149 HB
Typical Applications
AISI 1213
Screw machine products, bolts, studs
JIS G4804 SUM22L
Complex precision turned parts, high speed machining
Key Differences
Can AISI 1213 Be Substituted With JIS G4804 SUM22L?
AISI 1213 and JIS G4804 SUM22L overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM22L is often considered as a substitute for AISI 1213 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
AISI 1213
Hex Bar → (3 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 3300–4600 mm (129.92–181.1 in)
JIS G4804 SUM22L
Hex Bar → (2 listings)
Across Flats: 25–25 mm (0.98–0.98 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
AISI 1213
3 active listings and RFQs →
JIS G4804 SUM22L
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AISI 1213 and JIS G4804 SUM22L?
JIS G4804 SUM22L specifies Pb which is not specified for AISI 1213.
Can AISI 1213 be substituted with JIS G4804 SUM22L?
AISI 1213 and JIS G4804 SUM22L overlap closely enough on chemistry and mechanical properties that JIS G4804 SUM22L is often considered as a substitute for AISI 1213 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.