Post Stock Login Register

AISI 8617 vs IS 1570 (Part 4) 105Cr5

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

AISI 8617 and IS 1570 (Part 4) 105Cr5 (IS 1570 (Part 4):1988) are both steel grades. Both fall under the Alloy Steel category. AISI 8617 is defined under AISI, originating from United States, while IS 1570 (Part 4) 105Cr5 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, AISI 8617 vs IS 1570 (Part 4) 105Cr5 is a 58.6% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With AISI 8617:
NF A35-565 100C6 UNI 11234 100Cr6 GB/T 3077 12Cr2Ni4A GOST 4543 12HN3A IS 1570 (Part 4) 103Cr6 IS 1570 (Part 4) 103Cr4 IS 4367 07Cr4Mo6 IS 4367 10Cr9Mo10 IS 1570 (Part 4) 07Cr4Mo6 IS 1570 (Part 4) 10Cr20Mo6 IS 1570 (Part 7) 10Cr36Mo10H EN 10028-2 10CrMo9-10
Match Breakdown
CHEMISTRY MATCH
58.6%
MECHANICAL MATCH
No shared data
OVERALL
35%
Specifications
Property AISI 8617 IS 1570 (Part 4) 105Cr5
Standard AISI IS 1570 (Part 4):1988
Category Alloy Steel Alloy Steel
C (%) 0.15-0.20 0.90-1.20
Mn (%) 0.70-0.90 0.40-0.80
Si (%) 0.15-0.35 0.10-0.35
Ni (%) 0.40-0.70 Not specified
Cr (%) 0.40-0.60 1.00-1.60
Mo (%) 0.15-0.25 Not specified
P (%) 0.035 max Not specified
S (%) 0.040 max Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AISI 8617 IS 1570 (Part 4) 105Cr5
Tensile Strength 720-920 MPa Not specified
Yield Strength 520-720 MPa Not specified
Elongation 12-18% Not specified
Hardness 190-250 HB Not specified
Typical Applications
AISI 8617
Used for gears, camshafts, transmission parts, pinions, bearings, and heavy-duty mechanical components.
IS 1570 (Part 4) 105Cr5
Not documented
Key Differences
Can AISI 8617 Be Substituted With IS 1570 (Part 4) 105Cr5?
AISI 8617 and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AISI 8617
Round Bar → (2 listings)
Diameter: 50–50 mm (1.97–1.97 in)
Length: 5100–6600 mm (200.79–259.84 in)
IS 1570 (Part 4) 105Cr5
No active listings currently.
On M-EX Right Now
AISI 8617
2 active listings and RFQs →
IS 1570 (Part 4) 105Cr5
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between AISI 8617 and IS 1570 (Part 4) 105Cr5?
AISI 8617 specifies Ni, Mo, P, S which are not specified for IS 1570 (Part 4) 105Cr5.
Can AISI 8617 be substituted with IS 1570 (Part 4) 105Cr5?
AISI 8617 and IS 1570 (Part 4) 105Cr5 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.