Related Material — 69.9% match
based on chemical composition and mechanical property overlap.
ASTM A681 D2 (ASTM A681:2008) and IS 3748 XT215Cr12 (IS 3748:1990) are both steel grades.
Both fall under the Tool & Die Steels category.
ASTM A681 D2 is typically used for blanking dies, punches, drawing dies, forming tools, while IS 3748 XT215Cr12 is commonly used for cold work tools and dies for blanking, trimming, chipping and shearing.
ASTM A681 D2 is defined under ASTM International, originating from United States, while IS 3748 XT215Cr12 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, ASTM A681 D2 vs IS 3748 XT215Cr12 is a 74.4% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a related material overall at 69.9%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Cold work tools and dies for blanking, trimming, chipping and shearing
Can ASTM A681 D2 Be Substituted With IS 3748 XT215Cr12?
ASTM A681 D2 and IS 3748 XT215Cr12 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between ASTM A681 D2 and IS 3748 XT215Cr12?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A681 D2 be substituted with IS 3748 XT215Cr12?
ASTM A681 D2 and IS 3748 XT215Cr12 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.