Strong Match — 90.6% match
based on chemical composition and mechanical property overlap.
ASTM A681 H11 (ASTM A681:2008) and IS 3748 XT35Cr5MoV1 (IS 3748:1990) are both steel grades.
Both fall under the Tool & Die Steels category.
ASTM A681 H11 is typically used for die casting dies, extrusion tooling, forging dies, while IS 3748 XT35Cr5MoV1 is commonly used for hot work tools and dies, such as die-casting dies and hot headers.
ASTM A681 H11 is defined under ASTM International, originating from United States, while IS 3748 XT35Cr5MoV1 is defined under Bureau of Indian Standards (IS), originating from India.
As per chemical composition, ASTM A681 H11 vs IS 3748 XT35Cr5MoV1 is a 85.8% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 90.6%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A681 H11
IS 3748 XT35Cr5MoV1
Hardness
<=235 HB
<=235 HB
Condition
Annealed (maximum Brinell hardness)
Annealed (maximum Brinell hardness)
Typical Applications
ASTM A681 H11
Die casting dies, extrusion tooling, forging dies
IS 3748 XT35Cr5MoV1
Hot work tools and dies, such as die-casting dies and hot headers
Can ASTM A681 H11 Be Substituted With IS 3748 XT35Cr5MoV1?
ASTM A681 H11 and IS 3748 XT35Cr5MoV1 overlap closely enough on chemistry and mechanical properties that IS 3748 XT35Cr5MoV1 is often considered as a substitute for ASTM A681 H11 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A681 H11 and IS 3748 XT35Cr5MoV1?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A681 H11 be substituted with IS 3748 XT35Cr5MoV1?
ASTM A681 H11 and IS 3748 XT35Cr5MoV1 overlap closely enough on chemistry and mechanical properties that IS 3748 XT35Cr5MoV1 is often considered as a substitute for ASTM A681 H11 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.