Minimal Match — 35% match
based on chemical composition and mechanical property overlap.
ASTM A959 SS410 (ASTM A959:2011) and GOST 5632 08X18H10 (GOST 5632-2014) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A959 SS410 is typically used for cutlery, turbine blades, surgical instruments, fasteners, while GOST 5632 08X18H10 is commonly used for chemical equipment, food processing, general corrosion resistant applications.
ASTM A959 SS410 is defined under ASTM International (United States).
As per chemical composition, ASTM A959 SS410 vs GOST 5632 08X18H10 is a 65.6% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a minimal match overall at 35%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical equipment, food processing, general corrosion resistant applications
Key Differences
GOST 5632 08X18H10 specifies Ni which is not specified for ASTM A959 SS410.
Can ASTM A959 SS410 Be Substituted With GOST 5632 08X18H10?
ASTM A959 SS410 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
What is the difference between ASTM A959 SS410 and GOST 5632 08X18H10?
GOST 5632 08X18H10 specifies Ni which is not specified for ASTM A959 SS410.
Can ASTM A959 SS410 be substituted with GOST 5632 08X18H10?
ASTM A959 SS410 and GOST 5632 08X18H10 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.