Post Stock Login Register

AS/NZS 1595 C350 vs ASTM A1008 SS Grade 80

Related Material — 65.2% match based on chemical composition and mechanical property overlap.

AS/NZS 1595 C350 (AS/NZS 1595:1998) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades. Both fall under the Structural Steel category. AS/NZS 1595 C350 is typically used for cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins, while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts. AS/NZS 1595 C350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States.

As per chemical composition, AS/NZS 1595 C350 vs ASTM A1008 SS Grade 80 is a 97.8% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 65.2%.

Frequently Compared With AS/NZS 1595 C350:
CSA G40.21 480W CSA G40.21 300W CSA G40.21 350W ASTM A1008 SS Grade 50 CSA G40.21 400A AS/NZS 3679.1 300 GOST 19281 09G2S CSA G40.21 400W CSA G40.21 260W AS/NZS 3679.1 350 ASTM A283C ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
97.8%
MECHANICAL MATCH
0%
OVERALL
65.2%
Specifications
Property AS/NZS 1595 C350 ASTM A1008 SS Grade 80
Standard AS/NZS 1595:1998 ASTM A1008
Category Structural Steel Structural Steel
C (%) <=0.20 <=0.25
Mn (%) <=1.50 <=1.65
Si (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.040 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 1595 C350 ASTM A1008 SS Grade 80
Tensile Strength 430 MPa min 570 MPa min
Yield Strength 350 MPa min 550 MPa min
Elongation 14% min 10% min
Typical Applications
AS/NZS 1595 C350
Cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins
ASTM A1008 SS Grade 80
Cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts
Can AS/NZS 1595 C350 Be Substituted With ASTM A1008 SS Grade 80?
AS/NZS 1595 C350 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 1595 C350
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–4600 mm (98.43–181.1 in)
ASTM A1008 SS Grade 80
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–3700 mm (98.43–145.67 in)
On M-EX Right Now
AS/NZS 1595 C350
2 active listings and RFQs →
ASTM A1008 SS Grade 80
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 1595 C350 and ASTM A1008 SS Grade 80?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 1595 C350 be substituted with ASTM A1008 SS Grade 80?
AS/NZS 1595 C350 and ASTM A1008 SS Grade 80 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.