Post Stock Login Register

AS/NZS 1595 C350 vs ASTM A283C

Related Material — 63.2% match based on chemical composition and mechanical property overlap.

AS/NZS 1595 C350 (AS/NZS 1595:1998) and ASTM A283C (ASTM A283) are both steel grades. Both fall under the Structural Steel category. AS/NZS 1595 C350 is typically used for cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins, while ASTM A283C is commonly used for used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.. AS/NZS 1595 C350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while ASTM A283C is defined under ASTM International, originating from United States.

As per chemical composition, AS/NZS 1595 C350 vs ASTM A283C is a 94.8% match. As per mechanical properties, the match is 0%. Combined, this makes them a related material overall at 63.2%.

Frequently Compared With AS/NZS 1595 C350:
CSA G40.21 480W CSA G40.21 300W CSA G40.21 350W ASTM A1008 SS Grade 50 AS/NZS 3679.1 300 CSA G40.21 400A GOST 19281 09G2S CSA G40.21 400W CSA G40.21 260W AS/NZS 3679.1 350 ASTM A1008 SS Grade 80 ASTM A572 Gr.65
Match Breakdown
CHEMISTRY MATCH
94.8%
MECHANICAL MATCH
0%
OVERALL
63.2%
Specifications
Property AS/NZS 1595 C350 ASTM A283C
Standard AS/NZS 1595:1998 ASTM A283
Category Structural Steel Structural Steel
C (%) <=0.20 0.24 max
Mn (%) <=1.50 0.90 max
Si (%) <=0.50 0.40 max
P (%) <=0.040 0.035 max
S (%) <=0.040 0.040 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS 1595 C350 ASTM A283C
Tensile Strength 430 MPa min 380-515 MPa
Yield Strength 350 MPa min 205 MPa min
Elongation 14% min 23-27%
Hardness Not specified 120-170 HB
Typical Applications
AS/NZS 1595 C350
Cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins
ASTM A283C
Used for structural fabrication, storage tanks, buildings, bridges, machinery bases, and welded structures.
Can AS/NZS 1595 C350 Be Substituted With ASTM A283C?
AS/NZS 1595 C350 and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
AS/NZS 1595 C350
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–4600 mm (98.43–181.1 in)
ASTM A283C
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2900–3700 mm (114.17–145.67 in)
On M-EX Right Now
AS/NZS 1595 C350
2 active listings and RFQs →
ASTM A283C
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS 1595 C350 and ASTM A283C?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 1595 C350 be substituted with ASTM A283C?
AS/NZS 1595 C350 and ASTM A283C share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.