Post Stock Login Register

AS/NZS Grade 500 vs AS/NZS 1595 C350

Strong Match — 97.7% match based on chemical composition and mechanical property overlap.

AS/NZS Grade 500 (AS/NZS 3597:2008) and AS/NZS 1595 C350 (AS/NZS 1595:1998) are both steel grades. Both fall under the Structural Steel category. AS/NZS Grade 500 is typically used for heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets., while AS/NZS 1595 C350 is commonly used for cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins. AS/NZS Grade 500 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while AS/NZS 1595 C350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.

As per chemical composition, AS/NZS Grade 500 vs AS/NZS 1595 C350 is a 97.7% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 97.7%.

Frequently Compared With AS/NZS Grade 500:
AS/NZS 3679.1 300 AS/NZS 3679.1 350 CSA G40.21 300W IS 2062 E250B0 ASTM A1008 SS Grade 80 ASTM A283C ASTM A572 Grade 50 ASTM A572 Gr.65 AS/NZS 1595 C450 CSA G40.21 400A CSA G40.21 400W ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
97.7%
MECHANICAL MATCH
No shared data
OVERALL
97.7%
Specifications
Property AS/NZS Grade 500 AS/NZS 1595 C350
Standard AS/NZS 3597:2008 AS/NZS 1595:1998
Category Structural Steel Structural Steel
C (%) max 0.2 <=0.20
Mn (%) max 1.6 <=1.50
Si (%) max 0.55 <=0.50
P (%) max 0.03 <=0.040
S (%) max 0.03 <=0.040
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS Grade 500 AS/NZS 1595 C350
Tensile Strength Not specified 430 MPa min
Yield Strength Not specified 350 MPa min
Elongation Not specified 14% min
Typical Applications
AS/NZS Grade 500
Heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets.
AS/NZS 1595 C350
Cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins
Can AS/NZS Grade 500 Be Substituted With AS/NZS 1595 C350?
AS/NZS Grade 500 and AS/NZS 1595 C350 overlap closely enough on chemistry and mechanical properties that AS/NZS 1595 C350 is often considered as a substitute for AS/NZS Grade 500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
AS/NZS Grade 500
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3600 mm (122.05–141.73 in)
AS/NZS 1595 C350
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–4600 mm (98.43–181.1 in)
On M-EX Right Now
AS/NZS Grade 500
2 active listings and RFQs →
AS/NZS 1595 C350
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS Grade 500 and AS/NZS 1595 C350?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS Grade 500 be substituted with AS/NZS 1595 C350?
AS/NZS Grade 500 and AS/NZS 1595 C350 overlap closely enough on chemistry and mechanical properties that AS/NZS 1595 C350 is often considered as a substitute for AS/NZS Grade 500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.