Post Stock Login Register

AS/NZS Grade 500 vs ASTM A572 Gr.65

Strong Match — 90.8% match based on chemical composition and mechanical property overlap.

AS/NZS Grade 500 (AS/NZS 3597:2008) and ASTM A572 Gr.65 (ASTM A572) are both steel grades. Both fall under the Structural Steel category. AS/NZS Grade 500 is typically used for heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets., while ASTM A572 Gr.65 is commonly used for used for bridges, buildings, transmission towers, construction equipment, offshore structures, and structural members.. AS/NZS Grade 500 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while ASTM A572 Gr.65 is defined under ASTM International, originating from United States.

As per chemical composition, AS/NZS Grade 500 vs ASTM A572 Gr.65 is a 90.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 90.8%.

Frequently Compared With AS/NZS Grade 500:
AS/NZS 3679.1 300 AS/NZS 1595 C350 AS/NZS 3679.1 350 CSA G40.21 300W IS 2062 E250B0 ASTM A283C ASTM A1008 SS Grade 80 ASTM A572 Grade 50 AS/NZS 1595 C450 CSA G40.21 400W CSA G40.21 400A ASTM A1008 SS Grade 50
Match Breakdown
CHEMISTRY MATCH
90.8%
MECHANICAL MATCH
No shared data
OVERALL
90.8%
Specifications
Property AS/NZS Grade 500 ASTM A572 Gr.65
Standard AS/NZS 3597:2008 ASTM A572
Category Structural Steel Structural Steel
C (%) max 0.2 0.23 max
Mn (%) max 1.6 1.35 max
Si (%) max 0.55 0.40 max
P (%) max 0.03 0.040 max
S (%) max 0.03 0.050 max
V (%) Not specified 0.15 max
Nb (%) Not specified 0.05 max
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property AS/NZS Grade 500 ASTM A572 Gr.65
Tensile Strength Not specified 550-690 MPa
Yield Strength Not specified 450 MPa min
Elongation Not specified 18-21%
Hardness Not specified 170-220 HB
Typical Applications
AS/NZS Grade 500
Heavy mining equipment, bulldozer blades, wear-resistant structural applications, large crane booms, offshore jackets.
ASTM A572 Gr.65
Used for bridges, buildings, transmission towers, construction equipment, offshore structures, and structural members.
Key Differences
Can AS/NZS Grade 500 Be Substituted With ASTM A572 Gr.65?
AS/NZS Grade 500 and ASTM A572 Gr.65 overlap closely enough on chemistry and mechanical properties that ASTM A572 Gr.65 is often considered as a substitute for AS/NZS Grade 500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
Forms & Sizes Available on M-EX
AS/NZS Grade 500
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3600 mm (122.05–141.73 in)
ASTM A572 Gr.65
Plate → (4 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2600–4400 mm (102.36–173.23 in)
On M-EX Right Now
AS/NZS Grade 500
2 active listings and RFQs →
ASTM A572 Gr.65
4 active listings and RFQs →
Frequently Asked Questions
What is the difference between AS/NZS Grade 500 and ASTM A572 Gr.65?
ASTM A572 Gr.65 specifies V, Nb which are not specified for AS/NZS Grade 500.
Can AS/NZS Grade 500 be substituted with ASTM A572 Gr.65?
AS/NZS Grade 500 and ASTM A572 Gr.65 overlap closely enough on chemistry and mechanical properties that ASTM A572 Gr.65 is often considered as a substitute for AS/NZS Grade 500 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.