Strong Match — 98.5% match
based on chemical composition and mechanical property overlap.
AS/NZS 3678 Grade 350L0 (AS/NZS 3678:2016) and AS/NZS 1595 C350 (AS/NZS 1595:1998) are both steel grades.
Both fall under the Structural Steel category.
AS/NZS 3678 Grade 350L0 is typically used for refrigerated storage structures, cold climate construction, lng facility structural steel, antarctic research stations., while AS/NZS 1595 C350 is commonly used for cold-rolled structural steel sheet; roll-forming, cold-formed structural sections, purlins.
AS/NZS 3678 Grade 350L0 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while AS/NZS 1595 C350 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand.
As per chemical composition, AS/NZS 3678 Grade 350L0 vs AS/NZS 1595 C350 is a 97.7% match.
As per mechanical properties, the match is 100%.
Combined, this makes them a strong match overall at 98.5%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Can AS/NZS 3678 Grade 350L0 Be Substituted With AS/NZS 1595 C350?
AS/NZS 3678 Grade 350L0 and AS/NZS 1595 C350 overlap closely enough on chemistry and mechanical properties that AS/NZS 1595 C350 is often considered as a substitute for AS/NZS 3678 Grade 350L0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between AS/NZS 3678 Grade 350L0 and AS/NZS 1595 C350?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 3678 Grade 350L0 be substituted with AS/NZS 1595 C350?
AS/NZS 3678 Grade 350L0 and AS/NZS 1595 C350 overlap closely enough on chemistry and mechanical properties that AS/NZS 1595 C350 is often considered as a substitute for AS/NZS 3678 Grade 350L0 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.