Strong Match — 96.2% match
based on chemical composition and mechanical property overlap.
AS/NZS 3678 Grade 450 (AS/NZS 3678:2016) and ASTM A1008 SS Grade 80 (ASTM A1008) are both steel grades.
Both fall under the Structural Steel category.
AS/NZS 3678 Grade 450 is typically used for heavy cranes, offshore platforms, pressure vessels, structural members in high-rise construction, mining equipment., while ASTM A1008 SS Grade 80 is commonly used for cold-rolled high-strength structural steel sheet, higher strength grade; automotive structural/reinforcement components, cold-formed high-strength parts.
AS/NZS 3678 Grade 450 is defined under Australian/New Zealand Standard (AS/NZS), originating from Australia/New Zealand, while ASTM A1008 SS Grade 80 is defined under ASTM International, originating from United States.
As per chemical composition, AS/NZS 3678 Grade 450 vs ASTM A1008 SS Grade 80 is a 96.2% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 96.2%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
AS/NZS 3678 Grade 450
ASTM A1008 SS Grade 80
Tensile Strength
Not specified
570 MPa min
Yield Strength
Not specified
550 MPa min
Elongation
Not specified
10% min
Typical Applications
AS/NZS 3678 Grade 450
Heavy cranes, offshore platforms, pressure vessels, structural members in high-rise construction, mining equipment.
Can AS/NZS 3678 Grade 450 Be Substituted With ASTM A1008 SS Grade 80?
AS/NZS 3678 Grade 450 and ASTM A1008 SS Grade 80 overlap closely enough on chemistry and mechanical properties that ASTM A1008 SS Grade 80 is often considered as a substitute for AS/NZS 3678 Grade 450 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between AS/NZS 3678 Grade 450 and ASTM A1008 SS Grade 80?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can AS/NZS 3678 Grade 450 be substituted with ASTM A1008 SS Grade 80?
AS/NZS 3678 Grade 450 and ASTM A1008 SS Grade 80 overlap closely enough on chemistry and mechanical properties that ASTM A1008 SS Grade 80 is often considered as a substitute for AS/NZS 3678 Grade 450 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.