Post Stock Login Register

ASTM A240/A240M:2025 S20432 Steel: Specifications & Listings

ASTM A240/A240M:2025 S20432: S20432: austenitic (chromium-nickel or chromium-manganese-nickel) stainless steel plate, sheet and strip (UNS number, no type name printed). Specified in ASTM A240/A240M:2025.

Category: Stainless Steel
Grade Details
GradeASTM A240/A240M:2025 S20432
Standard ASTM A240/A240M:2025
ApplicationsPressure vessels and general applications (plate, sheet and strip)
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
EN 10088-1 X12CrMnNiN17-7-5 EN 10088-1:2014 Close Alternative
EN 10088-1 X12CrMnNiN17-7-5 EN 10088-1:2023 Close Alternative
ASTM A959 201 ASTM A959:2011 Close Alternative
EN 10088-1 X9CrMnNiCu17-8-5-2 EN 10088-1:2014 Close Alternative
EN 10088-1 X9CrMnNiCu17-8-5-2 EN 10088-1:2023 Close Alternative
ASTM A959 XM-1 ASTM A959:2011 Close Alternative
ASTM A276/A276M S20100 ASTM A276/A276M:2017 Close Alternative
EN 10088-1 X8CrMnNi19-6-3 EN 10088-1:2014 Close Alternative
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr Ni N Cu
<=0.08 3.00-5.00 <=0.045 <=0.030 <=1.00 17.0-18.0 4.0-6.0 0.05-0.20 2.00-3.00
Mechanical Properties
Tensile Strength >=515 MPa
Yield Strength >=205 MPa
Elongation >=40%
Hardness <=201 HB
Condition Plate, sheet and strip; yield by 0.2 percent offset

More data from ASTM A240/A240M:2025

From the standard
Mechanical properties 1 condition(s)
Product or thicknessTensile strength, min (MPa)Yield strength, min (MPa)Elongation in 50 mm, min (%)
All51520540
Minimum values; yield strength by the 0.2 percent offset method.
Source: ASTM A240/A240M:2025, Table 2
Hardness 1 condition(s)
Product or thicknessBrinell HBW, maxRockwell, max
All20192 HRBW
Maximum values; either Brinell or Rockwell scale may be used.
Source: ASTM A240/A240M:2025, Table 2
Cold bend 1 value
Cold bend angle
not required
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2

Active ASTM A240/A240M:2025 S20432 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A240/A240M:2025 S20432 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A240/A240M:2025 S20432

+ Post an RFQ for this grade

No open buyer requirements for ASTM A240/A240M:2025 S20432 at this time.

Register for Alerts