Post Stock Login Register

ASTM A240/A240M S32808 vs EN 10088-1 X2CrNiMoN25-7-4

Related Material — 62.8% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S32808 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiMoN25-7-4 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S32808 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiMoN25-7-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S32808 vs EN 10088-1 X2CrNiMoN25-7-4 is a 62.8% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 62.8%.

Frequently Compared With ASTM A240/A240M S32808:
IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr12MoVH GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH ASTM A959 .- GB/T 3280 06Cr19Ni10
Match Breakdown
CHEMISTRY MATCH
62.8%
MECHANICAL MATCH
No shared data
OVERALL
62.8%
Specifications
Property ASTM A240/A240M S32808 EN 10088-1 X2CrNiMoN25-7-4
Standard ASTM A240/A240M:2025 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) <=1.10 <=2.00
P (%) <=0.030 <=0.035
S (%) <=0.010 <=0.015
Si (%) <=0.50 <=1.00
Cr (%) 27.0-27.9 24.0-26.0
Ni (%) 7.0-8.2 6.0-8.0
Mo (%) 0.80-1.2 3.00-4.5
N (%) 0.30-0.40 0.24-0.35
W (%) 2.10-2.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S32808 EN 10088-1 X2CrNiMoN25-7-4
Tensile Strength >=700 MPa Not specified
Yield Strength >=500 MPa Not specified
Elongation >=15% Not specified
Hardness <=310 HB Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S32808
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiMoN25-7-4
Not documented
Key Differences
Can ASTM A240/A240M S32808 Be Substituted With EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32808 and EN 10088-1 X2CrNiMoN25-7-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S32808
0 active listings and RFQs →
EN 10088-1 X2CrNiMoN25-7-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S32808 and EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32808 specifies W which is not specified for EN 10088-1 X2CrNiMoN25-7-4.
Can ASTM A240/A240M S32808 be substituted with EN 10088-1 X2CrNiMoN25-7-4?
ASTM A240/A240M S32808 and EN 10088-1 X2CrNiMoN25-7-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.