Post Stock Login Register

ASTM A240/A240M S38815 vs ASTM A240/A240M S30601

Related Material — 69.4% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S38815 (ASTM A240/A240M:2025) and ASTM A240/A240M S30601 (ASTM A240/A240M:2025) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S38815 is typically used for pressure vessels and general applications (plate, sheet and strip), while ASTM A240/A240M S30601 is commonly used for pressure vessels and general applications (plate, sheet and strip). ASTM A240/A240M S38815 is defined under ASTM International, originating from United States, while ASTM A240/A240M S30601 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A240/A240M S38815 vs ASTM A240/A240M S30601 is a 54.2% match. As per mechanical properties, the match is 100%. Combined, this makes them a related material overall at 69.4%.

Frequently Compared With ASTM A240/A240M S38815:
GOST 5632 08X18H10 EN 10088-1 1.4301 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo EN 10088-1 1.4006 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH ASTM A959 .- GOST 5632 06Kh23N28 GB/T 3280 06Cr19Ni10 IS 1570 (Part 7) 11Cr17Ni13W3TiH
Match Breakdown
CHEMISTRY MATCH
54.2%
MECHANICAL MATCH
100%
OVERALL
69.4%
Specifications
Property ASTM A240/A240M S38815 ASTM A240/A240M S30601
Standard ASTM A240/A240M:2025 ASTM A240/A240M:2025
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.015
Mn (%) <=2.00 0.50-0.80
P (%) <=0.040 <=0.030
S (%) <=0.020 <=0.013
Si (%) 5.50-6.50 5.0-5.6
Cr (%) 13.0-15.0 17.0-18.0
Ni (%) 15.0-17.0 17.0-18.0
Mo (%) 0.75-1.50 <=0.20
Cu (%) 0.75-1.50 <=0.35
Al (%) <=0.30 Not specified
N (%) Not specified <=0.05
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S38815 ASTM A240/A240M S30601
Tensile Strength >=540 MPa >=540 MPa
Yield Strength >=255 MPa >=255 MPa
Elongation >=30% >=30%
Condition Plate, sheet and strip; yield by 0.2 percent offset Plate, sheet and strip; yield by 0.2 percent offset
Typical Applications
ASTM A240/A240M S38815
Pressure vessels and general applications (plate, sheet and strip)
ASTM A240/A240M S30601
Pressure vessels and general applications (plate, sheet and strip)
Key Differences
Can ASTM A240/A240M S38815 Be Substituted With ASTM A240/A240M S30601?
ASTM A240/A240M S38815 and ASTM A240/A240M S30601 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S38815
0 active listings and RFQs →
ASTM A240/A240M S30601
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S38815 and ASTM A240/A240M S30601?
ASTM A240/A240M S38815 specifies Al which is not specified for ASTM A240/A240M S30601. ASTM A240/A240M S30601 specifies N which is not specified for ASTM A240/A240M S38815.
Can ASTM A240/A240M S38815 be substituted with ASTM A240/A240M S30601?
ASTM A240/A240M S38815 and ASTM A240/A240M S30601 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.