ASTM A240/A240M:2025 S44535: S44535: ferritic or martensitic (chromium) stainless steel plate, sheet and strip (UNS number, no type name printed). Specified in ASTM A240/A240M:2025.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C
Mn
P
S
Si
Cr
Cu
La
Ti
Al
<=0.030
0.30-0.80
<=0.050
<=0.020
<=0.50
20.0-24.0
<=0.50
0.04-0.20
0.03-0.20
<=0.50
Mechanical Properties
Tensile Strength
>=400 MPa
Yield Strength
>=250 MPa
Elongation
>=25%
Hardness
<=90 HRBW
Condition
Plate, sheet and strip; yield by 0.2 percent offset
More data from ASTM A240/A240M:2025
From the standard
Mechanical properties1 condition(s)
Product or thickness
Tensile strength, min (MPa)
Yield strength, min (MPa)
Elongation in 50 mm, min (%)
All
400
250
25
Minimum values; yield strength by the 0.2 percent offset method. Elongation for thickness under 0.015 in. [0.38 mm] is 20 % minimum in 1 in. [25.4 mm].
Source: ASTM A240/A240M:2025, Table 2
Hardness1 condition(s)
Product or thickness
Brinell HBW, max
Rockwell, max
All
-
90 HRBW
Maximum values; either Brinell or Rockwell scale may be used. Hardness is for information only.
Source: ASTM A240/A240M:2025, Table 2
Cold bend1 value
Cold bend angle
not required
Bend tests are not required for chromium steels thicker than 1 in. [25 mm] or for any austenitic or duplex steel regardless of thickness.
Source: ASTM A240/A240M:2025, Table 2
Active ASTM A240/A240M:2025 S44535 Listings on M-EX (For Sale)