Post Stock Login Register

ASTM A240/A240M S44535 vs EN 10088-1 X2CrTi12

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S44535 (ASTM A240/A240M:2025) and EN 10088-1 X2CrTi12 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S44535 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrTi12 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S44535 vs EN 10088-1 X2CrTi12 is a 74.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S44535:
EN 10088-1 1.4845 GOST 5632 08X18H10 EN 10088-1 1.4006 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH IS 1570 (Part 7) 12Cr12Ni2Mo GOST 5632 06Kh23N28 EN 10088-1 1.4301 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr13H ASTM A959 .-
Match Breakdown
CHEMISTRY MATCH
74.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S44535 EN 10088-1 X2CrTi12
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) 0.30-0.80 <=1.00
P (%) <=0.050 <=0.040
S (%) <=0.020 <=0.015
Si (%) <=0.50 <=1.00
Cr (%) 20.0-24.0 10.5-12.5
Cu (%) <=0.50 Not specified
La (%) 0.04-0.20 Not specified
Ti (%) 0.03-0.20 Not specified
Al (%) <=0.50 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S44535 EN 10088-1 X2CrTi12
Tensile Strength >=400 MPa Not specified
Yield Strength >=250 MPa Not specified
Elongation >=25% Not specified
Hardness <=90 HRBW Not specified
Condition Plate, sheet and strip; yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S44535
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrTi12
Not documented
Key Differences
Can ASTM A240/A240M S44535 Be Substituted With EN 10088-1 X2CrTi12?
ASTM A240/A240M S44535 and EN 10088-1 X2CrTi12 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S44535
0 active listings and RFQs →
EN 10088-1 X2CrTi12
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S44535 and EN 10088-1 X2CrTi12?
ASTM A240/A240M S44535 specifies Cu, La, Ti, Al which are not specified for EN 10088-1 X2CrTi12.
Can ASTM A240/A240M S44535 be substituted with EN 10088-1 X2CrTi12?
ASTM A240/A240M S44535 and EN 10088-1 X2CrTi12 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.