Post Stock Login Register

ASTM A240/A240M S82011 vs EN 10088-1 X2CrNiN23-4

Related Material — 69.9% match based on chemical composition and mechanical property overlap.

ASTM A240/A240M S82011 (ASTM A240/A240M:2025) and EN 10088-1 X2CrNiN23-4 (EN 10088-1:2014) are both steel grades. Both fall under the Stainless Steel category. ASTM A240/A240M S82011 is defined under ASTM International, originating from United States, while EN 10088-1 X2CrNiN23-4 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A240/A240M S82011 vs EN 10088-1 X2CrNiN23-4 is a 70.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 69.9%.

Frequently Compared With ASTM A240/A240M S82011:
EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 ASTM A959 .- GOST 5632 06Kh23N28
Match Breakdown
CHEMISTRY MATCH
70.9%
MECHANICAL MATCH
No shared data
OVERALL
69.9%
Specifications
Property ASTM A240/A240M S82011 EN 10088-1 X2CrNiN23-4
Standard ASTM A240/A240M:2025 EN 10088-1:2014
Category Stainless Steel Stainless Steel
C (%) <=0.030 <=0.030
Mn (%) 2.00-3.00 <=2.00
P (%) <=0.040 <=0.035
S (%) <=0.020 <=0.015
Si (%) <=1.00 <=1.00
Cr (%) 20.5-23.5 22.0-24.5
Ni (%) 1.0-2.0 3.5-5.5
Mo (%) 0.10-1.00 0.10-0.60
N (%) 0.15-0.27 0.05-0.20
Cu (%) <=0.50 0.10-0.60
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A240/A240M S82011 EN 10088-1 X2CrNiN23-4
Tensile Strength >=700 MPa Not specified
Yield Strength >=515 MPa Not specified
Elongation >=30% Not specified
Hardness <=293 HB Not specified
Condition t <= 0.187 in. [5.00 mm] (first condition printed); yield by 0.2 percent offset Not specified
Typical Applications
ASTM A240/A240M S82011
Pressure vessels and general applications (plate, sheet and strip)
EN 10088-1 X2CrNiN23-4
Not documented
Can ASTM A240/A240M S82011 Be Substituted With EN 10088-1 X2CrNiN23-4?
ASTM A240/A240M S82011 and EN 10088-1 X2CrNiN23-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
On M-EX Right Now
ASTM A240/A240M S82011
0 active listings and RFQs →
EN 10088-1 X2CrNiN23-4
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A240/A240M S82011 and EN 10088-1 X2CrNiN23-4?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A240/A240M S82011 be substituted with EN 10088-1 X2CrNiN23-4?
ASTM A240/A240M S82011 and EN 10088-1 X2CrNiN23-4 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.