Strong Match — 91.7% match
based on chemical composition and mechanical property overlap.
ASTM A276/A276M S32750 (ASTM A276/A276M:2017) and JIS G4304 SUS327L1 (JIS G4304:2021) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A276/A276M S32750 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while JIS G4304 SUS327L1 is commonly used for hot-rolled stainless steel plates and strips.
ASTM A276/A276M S32750 is defined under ASTM International, originating from United States, while JIS G4304 SUS327L1 is defined under Japanese Industrial Standards (JIS), originating from Japan.
As per chemical composition, ASTM A276/A276M S32750 vs JIS G4304 SUS327L1 is a 100% match.
As per mechanical properties, the match is 75%.
Combined, this makes them a strong match overall at 91.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A276/A276M S32750
JIS G4304 SUS327L1
Tensile Strength
>=800 MPa
>=795 MPa
Yield Strength
>=550 MPa
>=550 MPa
Elongation
>=15%
>=15%
Hardness
<=310 HB
<=310 HB
Condition
Condition A (Annealed), hot-finished or cold-finished, up to 2 [50.8] incl sizes (first row printed)
Solution heat treated plate and strip; proof strength applies only when specified by the purchaser
Typical Applications
ASTM A276/A276M S32750
Stainless steel bars and shapes (hot-finished or cold-finished)
JIS G4304 SUS327L1
Hot-rolled stainless steel plates and strips
Can ASTM A276/A276M S32750 Be Substituted With JIS G4304 SUS327L1?
ASTM A276/A276M S32750 and JIS G4304 SUS327L1 overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS327L1 is often considered as a substitute for ASTM A276/A276M S32750 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A276/A276M S32750 and JIS G4304 SUS327L1?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S32750 be substituted with JIS G4304 SUS327L1?
ASTM A276/A276M S32750 and JIS G4304 SUS327L1 overlap closely enough on chemistry and mechanical properties that JIS G4304 SUS327L1 is often considered as a substitute for ASTM A276/A276M S32750 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.