Post Stock Login Register

ASTM A276/A276M:2017 S41000 Steel: Specifications & Listings

ASTM A276/A276M:2017 S41000: S41000 (type 410): martensitic stainless steel bars and shapes. Specified in ASTM A276/A276M:2017.

Category: Stainless Steel
Grade Details
GradeASTM A276/A276M:2017 S41000
Standard ASTM A276/A276M:2017
ApplicationsStainless steel bars and shapes (hot-finished or cold-finished)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
ASTM A959 403 ASTM A959:2011 USA No activity yet
ASTM A959 410Cb ASTM A959:2011 USA No activity yet
ASTM A959 SS410 ASTM A959:2011 USA 3 listings, 0 RFQs →
ASTM A959 410S ASTM A959:2011 USA No activity yet
EN 10088-1 X15Cr13 EN 10088-1:2014 Europe (CEN) No activity yet
ASTM A959 416Se ASTM A959:2011 USA No activity yet
ASTM A959 420 ASTM A959:2011 USA No activity yet
EN 10088-1 X20Cr13 EN 10088-1:2014 Europe (CEN) No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A959 SS410 ASTM A959:2011 Strong Match
ASTM A276/A276M S40300 ASTM A276/A276M:2017 Strong Match
ASTM A959 410Cb ASTM A959:2011 Strong Match
ASTM A959 410S ASTM A959:2011 Strong Match
ASTM A959 403 ASTM A959:2011 Strong Match
ASTM A276/A276M S42900 ASTM A276/A276M:2017 Strong Match
EN 10088-1 X15Cr13 EN 10088-1:2014 Strong Match
EN 10088-1 X15Cr13 EN 10088-1:2023 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Mn P S Si Cr
0.08-0.15 <=1.00 <=0.040 <=0.030 <=1.00 11.5-13.5
Mechanical Properties
Tensile Strength >=480 MPa
Yield Strength >=275 MPa
Elongation >=20%
Condition Condition A (Annealed), hot-finished, all sizes (first row printed)

More data from ASTM A276/A276M:2017

From the standard
Mechanical requirements by condition and size 6 row(s)
ConditionFinishDiameter or thickness, in. [mm]Tensile strength, min (MPa)Yield strength, min (MPa)Elongation, min (%)Reduction of area, min (%)Brinell HBW, max
A (Annealed)hot-finishedall4802752045-
A (Annealed)cold-finishedall4802751645-
T (Hardened and tempered, higher temperature)hot-finishedall6905501545-
T (Hardened and tempered, higher temperature)cold-finishedall6905501240-
H (Hardened and tempered, lower temperature)hot-finishedall8306201240-
H (Hardened and tempered, lower temperature)cold-finishedall (rounds only)8306201240-
Yield by the 0.2 percent offset method. Hardness is HBW unless otherwise indicated; equivalent Rockwell is permitted.
Source: ASTM A276/A276M:2017, Table 2
Response to heat treatment 3 values
Heat treatment temperature, min
955 deg C (1750 deg F)
Quenchant
Air
Hardness after treatment, min
35 HRC
Test sample section not over 3/8 in. [9.50 mm] thick; temperature tolerance +/-14 deg C.
Source: ASTM A276/A276M:2017, Table 3

Active ASTM A276/A276M:2017 S41000 Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A276/A276M:2017 S41000 listings at this time.

Register for Alerts

Buyer RFQs for ASTM A276/A276M:2017 S41000

+ Post an RFQ for this grade

No open buyer requirements for ASTM A276/A276M:2017 S41000 at this time.

Register for Alerts