Strong Match — 91.7% match
based on chemical composition and mechanical property overlap.
ASTM A276/A276M S41000 (ASTM A276/A276M:2017) and ASTM A959 410S (ASTM A959:2011) are both steel grades.
Both fall under the Stainless Steel category.
ASTM A276/A276M S41000 is typically used for stainless steel bars and shapes (hot-finished or cold-finished), while ASTM A959 410S is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1).
ASTM A276/A276M S41000 is defined under ASTM International, originating from United States, while ASTM A959 410S is defined under ASTM International, originating from United States.
As per chemical composition, ASTM A276/A276M S41000 vs ASTM A959 410S is a 91.7% match.
Mechanical property data is not available for both grades, so this factor could not be scored.
Combined, this makes them a strong match overall at 91.7%.
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property
ASTM A276/A276M S41000
ASTM A959 410S
Tensile Strength
>=480 MPa
Not specified
Yield Strength
>=275 MPa
Not specified
Elongation
>=20%
Not specified
Condition
Condition A (Annealed), hot-finished, all sizes (first row printed)
Not specified
Typical Applications
ASTM A276/A276M S41000
Stainless steel bars and shapes (hot-finished or cold-finished)
ASTM A959 410S
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Can ASTM A276/A276M S41000 Be Substituted With ASTM A959 410S?
ASTM A276/A276M S41000 and ASTM A959 410S overlap closely enough on chemistry and mechanical properties that ASTM A959 410S is often considered as a substitute for ASTM A276/A276M S41000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
What is the difference between ASTM A276/A276M S41000 and ASTM A959 410S?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A276/A276M S41000 be substituted with ASTM A959 410S?
ASTM A276/A276M S41000 and ASTM A959 410S overlap closely enough on chemistry and mechanical properties that ASTM A959 410S is often considered as a substitute for ASTM A276/A276M S41000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.