Post Stock Login Register

ASTM A276/A276M S43000 vs EN 10088-1 X10CrAlSi18

Strong Match — 85.9% match based on chemical composition and mechanical property overlap.

ASTM A276/A276M S43000 (ASTM A276/A276M:2017) and EN 10088-1 X10CrAlSi18 (EN 10088-1:2023) are both steel grades. Both fall under the Stainless Steel category. ASTM A276/A276M S43000 is defined under ASTM International, originating from United States, while EN 10088-1 X10CrAlSi18 is defined under European Standard (EN), originating from Europe.

As per chemical composition, ASTM A276/A276M S43000 vs EN 10088-1 X10CrAlSi18 is a 85.9% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 85.9%.

Frequently Compared With ASTM A276/A276M S43000:
EN 10088-1 1.4006 ASTM A959 .- GOST 5632 06Kh23N28 GOST 5632 08X18H10 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12Ni2Mo GB/T 3280 06Cr19Ni10 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoVH
Match Breakdown
CHEMISTRY MATCH
85.9%
MECHANICAL MATCH
No shared data
OVERALL
85.9%
Specifications
Property ASTM A276/A276M S43000 EN 10088-1 X10CrAlSi18
Standard ASTM A276/A276M:2017 EN 10088-1:2023
Category Stainless Steel Stainless Steel
C (%) <=0.12 <=0.12
Mn (%) <=1.00 <=1.00
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.015
Si (%) <=1.00 0.70-1.40
Cr (%) 16.0-18.0 17.0-19.0
Al (%) Not specified 0.70-1.20
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A276/A276M S43000 EN 10088-1 X10CrAlSi18
Tensile Strength >=415 MPa Not specified
Yield Strength >=207 MPa Not specified
Elongation >=20% Not specified
Condition Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed) Not specified
Typical Applications
ASTM A276/A276M S43000
Stainless steel bars and shapes (hot-finished or cold-finished)
EN 10088-1 X10CrAlSi18
Not documented
Key Differences
Can ASTM A276/A276M S43000 Be Substituted With EN 10088-1 X10CrAlSi18?
ASTM A276/A276M S43000 and EN 10088-1 X10CrAlSi18 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrAlSi18 is often considered as a substitute for ASTM A276/A276M S43000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A276/A276M S43000
0 active listings and RFQs →
EN 10088-1 X10CrAlSi18
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A276/A276M S43000 and EN 10088-1 X10CrAlSi18?
EN 10088-1 X10CrAlSi18 specifies Al which is not specified for ASTM A276/A276M S43000.
Can ASTM A276/A276M S43000 be substituted with EN 10088-1 X10CrAlSi18?
ASTM A276/A276M S43000 and EN 10088-1 X10CrAlSi18 overlap closely enough on chemistry and mechanical properties that EN 10088-1 X10CrAlSi18 is often considered as a substitute for ASTM A276/A276M S43000 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.