Post Stock Login Register

ASTM A588 Grade B vs ASTM A588

Minimal Match — 35% match based on chemical composition and mechanical property overlap.

ASTM A588 Grade B (ASTM A588) and ASTM A588 (ASTM A588) are both steel grades. Both fall under the Structural Steel (Corten / Weathering) category. ASTM A588 Grade B is typically used for high-strength low-alloy structural steel with atmospheric corrosion resistance (weathering steel); bridges, transmission/communication towers, gusset plates, exposed structural applications, while ASTM A588 is commonly used for used for bridges, railway wagons, transmission poles, architectural structures, containers, and outdoor construction.. ASTM A588 Grade B is defined under ASTM International, originating from United States, while ASTM A588 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A588 Grade B vs ASTM A588 is a 86.7% match. As per mechanical properties, the match is 50%. Combined, this makes them a minimal match overall at 35%.

Frequently Compared With ASTM A588 Grade B:
EN 10025-5 S355J2W EN 10025-5 S355J0WP JIS G3114 SMA400 CSA G40.21 260WT ASTM A588 Grade A CSA G40.21 350A CSA G40.21 50W AS/NZS 3678 Grade 350WR EN 10025-5 S355J2WP CSA G40.21 480A ASTM A709 Grade HPS 70W EN 10025-5 S235J2W
Match Breakdown
CHEMISTRY MATCH
86.7%
MECHANICAL MATCH
50%
OVERALL
35%
Specifications
Property ASTM A588 Grade B ASTM A588
Standard ASTM A588 ASTM A588
Category Structural Steel (Corten / Weathering) Structural Steel (Corten / Weathering)
C (%) <=0.20 0.19 max
Mn (%) 0.75-1.25 0.80-1.25
Si (%) 0.15-0.30 0.30-0.65
P (%) <=0.040 0.04 max
S (%) <=0.050 0.05 max
Cu (%) 0.20-0.40 0.20-0.40
Cr (%) 0.40-0.70 0.40-0.70
Ni (%) <=0.50 0.40 max
Mo (%) 0.02-0.10 Not specified
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A588 Grade B ASTM A588
Tensile Strength 485 MPa min 485-630 MPa
Yield Strength 345 MPa min 345 MPa min
Elongation 18% min 18-21%
Hardness 140-190 HB 140-190 HB
Typical Applications
ASTM A588 Grade B
High-strength low-alloy structural steel with atmospheric corrosion resistance (weathering steel); bridges, transmission/communication towers, gusset plates, exposed structural applications
ASTM A588
Used for bridges, railway wagons, transmission poles, architectural structures, containers, and outdoor construction.
Key Differences
Can ASTM A588 Grade B Be Substituted With ASTM A588?
ASTM A588 Grade B and ASTM A588 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A588 Grade B
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 3100–3200 mm (122.05–125.98 in)
ASTM A588
Plate → (2 listings)
Thickness: 10–10 mm (0.39–0.39 in)
Width: 1500–1500 mm (59.06–59.06 in)
Length: 2500–2700 mm (98.43–106.3 in)
On M-EX Right Now
ASTM A588 Grade B
2 active listings and RFQs →
ASTM A588
2 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A588 Grade B and ASTM A588?
ASTM A588 Grade B specifies Mo which is not specified for ASTM A588.
Can ASTM A588 Grade B be substituted with ASTM A588?
ASTM A588 Grade B and ASTM A588 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.