Post Stock Login Register

ASTM A681 A5 vs ASTM A681 D2

Related Material — 67.4% match based on chemical composition and mechanical property overlap.

ASTM A681 A5 (ASTM A681:2008) and ASTM A681 D2 (ASTM A681:2008) are both steel grades. Both fall under the Tool & Die Steels category. ASTM A681 A5 is typically used for tools, dies and fixtures (clause 1.2), while ASTM A681 D2 is commonly used for blanking dies, punches, drawing dies, forming tools. ASTM A681 A5 is defined under ASTM International, originating from United States, while ASTM A681 D2 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A681 A5 vs ASTM A681 D2 is a 67.4% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a related material overall at 67.4%.

Frequently Compared With ASTM A681 A5:
DIN EN ISO 4957 1.2344 DIN EN ISO 4957 1.2379 EN ISO 683-17 100Cr6 IS 1570 (Part 6) 103T3 IS 1570 (Part 6) 133T3 GOST 5950 3H2W8F EN ISO 4957 1.2316 GB/T 1299 4Cr5MoSiV GB/T 1299 4Cr5MoSiV1 GOST 5950 4H5MFS IS 1570 (Part 6) 118T3 GB/T 1299 3Cr2W8V
Match Breakdown
CHEMISTRY MATCH
67.4%
MECHANICAL MATCH
No shared data
OVERALL
67.4%
Specifications
Property ASTM A681 A5 ASTM A681 D2
Standard ASTM A681:2008 ASTM A681:2008
Category Tool & Die Steels Tool & Die Steels
C (%) 0.95-1.05 1.40-1.60
Mn (%) 2.80-3.20 0.10-0.60
P (%) <=0.030 <=0.030
S (%) <=0.030 <=0.030
Si (%) 0.10-0.70 0.10-0.60
Cr (%) 0.90-1.40 11.00-13.00
Mo (%) 0.90-1.40 0.70-1.20
V (%) Not specified 0.50-1.10
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A681 A5 ASTM A681 D2
Hardness Not specified <=255 HB
Condition Not specified Annealed (maximum Brinell hardness)
Typical Applications
ASTM A681 A5
Tools, dies and fixtures (clause 1.2)
ASTM A681 D2
Blanking dies, punches, drawing dies, forming tools
Key Differences
Can ASTM A681 A5 Be Substituted With ASTM A681 D2?
ASTM A681 A5 and ASTM A681 D2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.
Forms & Sizes Available on M-EX
ASTM A681 A5
No active listings currently.
ASTM A681 D2
Round Bar → (19 listings)
Diameter: 70–120 mm (2.76–4.72 in)
Length: 2600–6900 mm (102.36–271.65 in)
Flat Bar → (3 listings)
Thickness: 30–30 mm (1.18–1.18 in)
Width: 150–150 mm (5.91–5.91 in)
Length: 1000–2500 mm (39.37–98.43 in)
On M-EX Right Now
ASTM A681 A5
0 active listings and RFQs →
ASTM A681 D2
22 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A681 A5 and ASTM A681 D2?
ASTM A681 D2 specifies V which is not specified for ASTM A681 A5.
Can ASTM A681 A5 be substituted with ASTM A681 D2?
ASTM A681 A5 and ASTM A681 D2 share some compositional similarity but differ enough that substitution should not be assumed. Review the differences above carefully, and consult the applicable standard or a metallurgist before using one in place of the other.