Post Stock Login Register

ASTM A959 201 vs ASTM A276/A276M S20100

Strong Match — 100% match based on chemical composition and mechanical property overlap.

ASTM A959 201 (ASTM A959:2011) and ASTM A276/A276M S20100 (ASTM A276/A276M:2017) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 201 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A276/A276M S20100 is commonly used for stainless steel bars and shapes (hot-finished or cold-finished). ASTM A959 201 is defined under ASTM International, originating from United States, while ASTM A276/A276M S20100 is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 201 vs ASTM A276/A276M S20100 is a 100% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 100%.

Frequently Compared With ASTM A959 201:
ASTM A959 301 ASTM A959 202 ASTM A959 .- ASTM A959 205 GOST 5632 08X18H10 EN 10088-1 1.4006 IS 1570 (Part 7) 12Cr12MoH GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4401 EN 10088-1 1.4845
Match Breakdown
CHEMISTRY MATCH
100%
MECHANICAL MATCH
No shared data
OVERALL
100%
Specifications
Property ASTM A959 201 ASTM A276/A276M S20100
Standard ASTM A959:2011 ASTM A276/A276M:2017
Category Stainless Steel Stainless Steel
C (%) <=0.15 <=0.15
Cr (%) 16.0-18.0 16.0-18.0
Mn (%) 5.5-7.5 5.5-7.5
N (%) <=0.25 <=0.25
Ni (%) 3.5-5.5 3.5-5.5
P (%) <=0.060 <=0.060
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 201 ASTM A276/A276M S20100
Tensile Strength Not specified >=515 MPa
Yield Strength Not specified >=275 MPa
Elongation Not specified >=40%
Condition Not specified Condition A (Annealed), hot-finished or cold-finished, all sizes (first row printed)
Typical Applications
ASTM A959 201
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A276/A276M S20100
Stainless steel bars and shapes (hot-finished or cold-finished)
Can ASTM A959 201 Be Substituted With ASTM A276/A276M S20100?
ASTM A959 201 and ASTM A276/A276M S20100 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S20100 is often considered as a substitute for ASTM A959 201 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 201
0 active listings and RFQs →
ASTM A276/A276M S20100
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 201 and ASTM A276/A276M S20100?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 201 be substituted with ASTM A276/A276M S20100?
ASTM A959 201 and ASTM A276/A276M S20100 overlap closely enough on chemistry and mechanical properties that ASTM A276/A276M S20100 is often considered as a substitute for ASTM A959 201 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.