Post Stock Login Register

ASTM A959:2011 304H Steel: Specifications & Listings

ASTM A959:2011 304H: Austenitic stainless steel type 304H (UNS S30409) with the composition limits of ASTM A959-11. Carbon 0.04-0.10% and chromium 18.0-20.0%.

Category: Stainless Steel
Grade Details
GradeASTM A959:2011 304H
Standard ASTM A959:2011
ApplicationsWrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Equivalent / Similar Grades
Grade Standard Region Live on M-EX
SAE 30304 SAE J405 USA 2 listings, 0 RFQs →
GB/T 3280 06Cr19Ni10 GB/T 3280-2015 China 2 listings, 0 RFQs →
IS 1570 (Part 7) 7Cr18Ni10H IS 1570 (Part 7):1992 India No activity yet
ASTM A240/A240M S30409 ASTM A240/A240M:2025 USA No activity yet
ASTM A276/A276M S30400 ASTM A276/A276M:2017 USA No activity yet
KS D3566 STS304 KS D3566:2021 Korea 0 listings, 2 RFQs →
JIS G4304 SUS304 JIS G4304:2021 Japan No activity yet
ASTM A240/A240M S30451 ASTM A240/A240M:2025 USA No activity yet
ASTM A240/A240M S30452 ASTM A240/A240M:2025 USA No activity yet
IS 6603 X05Cr19Ni9N IS 6603:2024 India No activity yet
EN 10088-3 X5CrNiN19-9 EN 10088-3:2014 Europe No activity yet
JIS G4304 SUS304Cu JIS G4304:2021 Japan No activity yet
JIS G4304 SUS304N1 JIS G4304:2021 Japan No activity yet
Grade ComparisonCompare With a Specific Grade →
Grade Standard Match
ASTM A240/A240M S30409 ASTM A240/A240M:2025 Strong Match
GB/T 3280 06Cr19Ni10 GB/T 3280-2015 Strong Match
ASTM A276/A276M S30400 ASTM A276/A276M:2017 Strong Match
IS 1570 (Part 7) 7Cr18Ni10H IS 1570 (Part 7):1992 Strong Match
KS D3566 STS304 KS D3566:2021 Strong Match
JIS G4304 SUS304 JIS G4304:2021 Strong Match
JIS G4305 SUS304 JIS G4305:2012 Strong Match
SAE 30304 SAE J405 Strong Match
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Chemical Composition (%)
C Cr Mn Ni P S Si
0.04-0.10 18.0-20.0 <=2.00 8.0-11.0 <=0.045 <=0.030 <=1.00

More data from ASTM A959:2011

From the standard
Other composition limits from Table 1 and its footnotes
UNS number
S30409
Metallurgical class
Austenitic grade: usually predominantly face-centered cubic, hardenable only by cold working
Type
304H (designation originally assigned by the American Iron and Steel Institute)
Values
Maximum unless a range or minimum is shown; where two limits are shown for the same element in one grade the more stringent applies
These are the recommended composition limits of the A959 guide, intended for adoption by standards for stainless steel products; they are not a product specification.
Source: ASTM A959:2011, Table 1 and its footnotes

Active ASTM A959:2011 304H Listings on M-EX (For Sale)

+ Create a Listing for this grade

No active ASTM A959:2011 304H listings at this time.

Register for Alerts

Buyer RFQs for ASTM A959:2011 304H

+ Post an RFQ for this grade

No open buyer requirements for ASTM A959:2011 304H at this time.

Register for Alerts