Post Stock Login Register

ASTM A959 316H vs IS 11169 (Part 2) X04Cr17Ni12Mo2

Strong Match — 95% match based on chemical composition and mechanical property overlap.

ASTM A959 316H (ASTM A959:2011) and IS 11169 (Part 2) X04Cr17Ni12Mo2 (IS 11169 (Part 2):1989) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 316H is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while IS 11169 (Part 2) X04Cr17Ni12Mo2 is commonly used for cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1). ASTM A959 316H is defined under ASTM International, originating from United States, while IS 11169 (Part 2) X04Cr17Ni12Mo2 is defined under Bureau of Indian Standards (IS), originating from India.

As per chemical composition, ASTM A959 316H vs IS 11169 (Part 2) X04Cr17Ni12Mo2 is a 95% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 95%.

Frequently Compared With ASTM A959 316H:
ASTM A959 16-8-2H EN 10088-1 1.4006 GB/T 3280 06Cr19Ni10 GOST 5632 06Kh23N28 EN 10088-1 1.4301 EN 10088-1 1.4401 IS 1570 (Part 7) 12Cr12Ni2Mo ASTM A959 .- EN 10088-1 1.4845 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12MoVH GOST 5632 08X18H10
Match Breakdown
CHEMISTRY MATCH
95%
MECHANICAL MATCH
No shared data
OVERALL
95%
Specifications
Property ASTM A959 316H IS 11169 (Part 2) X04Cr17Ni12Mo2
Standard ASTM A959:2011 IS 11169 (Part 2):1989
Category Stainless Steel Stainless Steel
C (%) 0.04-0.10 <=0.08
Cr (%) 16.0-18.0 16.0-18.0
Mn (%) <=2.00 <=2.0
Mo (%) 2.00-3.00 2.0-3.0
Ni (%) 10.0-14.0 10.0-14.0
P (%) <=0.045 <=0.045
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.0
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Mechanical Properties
Property ASTM A959 316H IS 11169 (Part 2) X04Cr17Ni12Mo2
Yield Strength (0.2% proof) Not specified >=205 MPa
Tensile Strength Not specified 500-700 MPa
Elongation Not specified >=45%
Impact (U-notch 5 mm) Not specified >=60 J
Condition Not specified Quenched reference test piece (Table 6 treatment)
Typical Applications
ASTM A959 316H
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
IS 11169 (Part 2) X04Cr17Ni12Mo2
Cold heading and cold extrusion; the standard covers wires, wire rods and bars (clause 1.1)
Can ASTM A959 316H Be Substituted With IS 11169 (Part 2) X04Cr17Ni12Mo2?
ASTM A959 316H and IS 11169 (Part 2) X04Cr17Ni12Mo2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 2) X04Cr17Ni12Mo2 is often considered as a substitute for ASTM A959 316H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 316H
0 active listings and RFQs →
IS 11169 (Part 2) X04Cr17Ni12Mo2
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 316H and IS 11169 (Part 2) X04Cr17Ni12Mo2?
Both grades share a similar composition profile; see the specification table above for the exact chemistry and mechanical property values.
Can ASTM A959 316H be substituted with IS 11169 (Part 2) X04Cr17Ni12Mo2?
ASTM A959 316H and IS 11169 (Part 2) X04Cr17Ni12Mo2 overlap closely enough on chemistry and mechanical properties that IS 11169 (Part 2) X04Cr17Ni12Mo2 is often considered as a substitute for ASTM A959 316H in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.