Post Stock Login Register

ASTM A959 439 vs ASTM A959 .-

Strong Match — 87% match based on chemical composition and mechanical property overlap.

ASTM A959 439 (ASTM A959:2011) and ASTM A959 .- (ASTM A959:2011) are both steel grades. Both fall under the Stainless Steel category. ASTM A959 439 is typically used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1), while ASTM A959 .- is commonly used for wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1). ASTM A959 439 is defined under ASTM International, originating from United States, while ASTM A959 .- is defined under ASTM International, originating from United States.

As per chemical composition, ASTM A959 439 vs ASTM A959 .- is a 87% match. Mechanical property data is not available for both grades, so this factor could not be scored. Combined, this makes them a strong match overall at 87%.

Frequently Compared With ASTM A959 439:
GOST 5632 06Kh23N28 GOST 5632 08X18H10 EN 10088-1 1.4301 EN 10088-1 1.4845 IS 1570 (Part 7) 12Cr12MoH IS 1570 (Part 7) 12Cr12MoVH GB/T 3280 06Cr19Ni10 EN 10088-1 1.4006 IS 1570 (Part 7) 11Cr17Ni13W3TiH IS 1570 (Part 7) 12Cr12Ni2Mo IS 1570 (Part 7) 12Cr13H EN 10088-1 1.4401
Match Breakdown
CHEMISTRY MATCH
87%
MECHANICAL MATCH
No shared data
OVERALL
87%
Specifications
Property ASTM A959 439 ASTM A959 .-
Standard ASTM A959:2011 ASTM A959:2011
Category Stainless Steel Stainless Steel
Al (%) <=0.15 Not specified
C (%) <=0.030 <=0.030
Cr (%) 17.0-19.0 18.0-20.0
Mn (%) <=1.00 <=1.00
N (%) <=0.030 <=0.030
Ni (%) <=0.50 <=0.50
P (%) <=0.040 <=0.040
S (%) <=0.030 <=0.030
Si (%) <=1.00 <=1.00
Cb (%) Not specified 0.10-0.60
Ti (%) Not specified 0.07-0.30
Matched by chemical composition and mechanical properties, not a formal equivalence claim. Always verify against the applicable standard before substitution.
Typical Applications
ASTM A959 439
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
ASTM A959 .-
Wrought stainless steel products; recommended composition limits for adoption by product standards (clause 1.1)
Key Differences
Can ASTM A959 439 Be Substituted With ASTM A959 .-?
ASTM A959 439 and ASTM A959 .- overlap closely enough on chemistry and mechanical properties that ASTM A959 .- is often considered as a substitute for ASTM A959 439 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.
On M-EX Right Now
ASTM A959 439
0 active listings and RFQs →
ASTM A959 .-
0 active listings and RFQs →
Frequently Asked Questions
What is the difference between ASTM A959 439 and ASTM A959 .-?
ASTM A959 439 specifies Al which is not specified for ASTM A959 .-. ASTM A959 .- specifies Cb, Ti which are not specified for ASTM A959 439.
Can ASTM A959 439 be substituted with ASTM A959 .-?
ASTM A959 439 and ASTM A959 .- overlap closely enough on chemistry and mechanical properties that ASTM A959 .- is often considered as a substitute for ASTM A959 439 in many applications. Always confirm the specific property range your application needs before substituting, and check with your supplier's mill certificate.